Behringer PMP1680S Manual - Page 12

12 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual 6. Specifications Microphone Inputs Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +30 dB, +10 dB with pad +12 dBu @ +10 dB gain approx. 2.2 kOhm balanced / approx. 1.1 kOhm unbalanced 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain) 0.001% / 0.0007% A-weighted Mono Line Inputs Type Impedance Max. input level ¼" TS connectors, balanced approx. 20 kOhm, balanced +21 dBu Stereo Line Inputs PMP980S/PMP1680S Type Impedance Max. input level ¼" TRS connectors, unbalanced approx. 100 kOhm, unbalanced +21 dBu Equalizer Low Mid High 80 Hz / +/-15 dB 2.5 kHz / +/-15 dB 12 kHz / +/-15 dB CD/TAPE Input Type Impedance RCA approx. 10 kOhm Preamp Outputs MAIN Type Impedance Max. output level MONITOR Type Impedance Max. output level Stereo Outputs PMP960M Type Impedance Max. input level PMP980S/PMP1680S Type Impedance Max. input level Type Impedance Max. input level Main Mix System Data Noise: MAIN MIX @ -∞ Channel fader -∞ MAIN MIX @ 0 dB Channel fader -∞ MAIN MIX @ 0 dB Channel fader @ 0 dB Loudspeaker Outputs Type Load impedance: MAIN L/R MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE ¼" TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu ¼" TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu RCA, mono output approx. 1 kOhm +21 dBu ¼" TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu RCA approx. 1 kOhm +21 dBu -102 dB/-106 dB A-weighted -88 dB/-91 dB A-weighted -84 dB/-86 dB A-weighted Neutrik Speakon-compatible connector 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm