Behringer PMP1680S Brochure - Page 7

Page 7 of 8 EUROPOWER PMP6000 PMP4000 PMP1680S MICROPHONE INPUTS PMP6000/PMP4000 Type XLR, electronically balanced input circuit Mic E.I.N. (20 Hz - 20 kHz) PMP6000/PMP4000 @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) -134 dB/136 dB A-weighted -131.5 dB/134 dB A-weighted -129 dB/155 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +10 dB, +60 dB +12 dBu @ +10 dB gain approx. 2.6 k Ohm balanced/ 1.3 k Ohm unbalanced 109 dB/112 dB A-weighted (0 dBu In @ +10 dB gain) 0.002%/0.0018% A-weighted MONO LINE INPUTS PMP6000/PMP4000 Type Impedance Max. input level ¼" TS connectors, balanced approx. 20 k Ohm +21 dBu STEREO LINE INPUTS PMP6000/PMP4000 Type Impedance Max. input level ¼" TRS connectors, unbalanced > 3.6 k Ohm +22 dBu EQUALIZER PMP6000/PMP4000 Low 80 Hz/+/-15 dB PMP4000 Mid 2.5 kHz/+/-15 dB PMP6000 Mid 100 Hz - 8 kHz/+/-15 dB PMP6000/PMP4000 High 12 kHz/+/-15 dB 2 TRACK INPUT PMP6000/PMP4000 Type Impedance RCA approx. 3.6 k Ohm PREAMP OUTPUTS PMP6000/PMP4000 MAIN Type Impedance Max. output level ¼" TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu MONITOR PMP6000/PMP4000 Type Impedance Max. output level ¼" TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu STEREO OUTPUTS PMP6000/PMP4000 Type Impedance Max. input level Type Impedance Max. input level ¼" TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu RCA approx. 1 kOhm +21 dBu LOUDSPEAKER OUTPUTS PMP6000/PMP4000 Type Professional locking connector Load impedance: MAIN L/R MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm DSP PMP6000/PMP4000 Converter 24-bit Delta-Sigma, 64/128-times oversampling Dynamics D/A 90 dB Sampling rate 46.875 kHz Delay Time max. 5 secs Signal run time approx. 1.5 ms (Line In > Line Out) DISPLAY PMP4000 Type 2-digit, 7-segment LED PMP6000 Type 2 x 2-digit, 7-segment LED OUTPUT POWER RMS @ 1% THD, both channels driven: PMP6000 8 Ohm per channel 300 W 4 Ohm per channel 600 W RMS @ 1% THD, bridged mode: PMP6000/PMP4000 8 Ohm 1,200 W Peak Power, both channels driven: PMP6000/PMP4000/PMP1680S 8 Ohm per channel 400 W 4 Ohm per channel 800 W Peak Power, bridged mode: PMP6000/PMP4000 8 Ohm 1,600 W POWER SUPPLY Mains voltage PMP6000/PMP4000 USA/Canada China/Korea Europe/Australia Japan Fuse 100 - 120 V~ Fuse 220 - 240 V~ 120 V~, 60 Hz 220 V~, 50/60 Hz 230 V~, 50 Hz 100 V~, 50 - 60 Hz T 10 A H 250 V T 6.3 A H 250 V POWER CONSUMPTION PMP6000/PMP4000 Power consumption Mains connector 1,050 W IEC standard receptacle DIMENSIONS/WEIGHT PMP4000 Dimensions (H x W x D) 4 7/8 x 18 3/4 x 18 1/8" 122 x 476 x 460 mm PMP6000 Dimensions (H x W x D) 4 7/8 x 23 1/2 x 19 1/2" 122 x 596 x 496 mm PMP4000 Weight 22.9 lbs/10.38 kg PMP6000 Weight 28.9 lbs/13.1 kg