Behringer TN6232 Specifications Sheet - Page 3

TN6232 Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor Architect's and Engineer's Specifications The automatic feedback suppressor shall be a dual-channel digital signal processor with thirty-two (32) 1/30th octave filters per channel. The filters shall be of the processor-controlled variable Q type (filter skirts narrow and widen at the discretion of the processor). The device may be used on selected insert points, sub-groups, monitor feeds, or the entire mix. It shall detect feedback, determine the offending frequency, and then assign a notch filter to eliminate the feedback automatically. The device shall continue to provide this function throughout the program or performance, and shall use dynamic notch filters, which will be automatically assigned to new frequencies should feedback occur during the program. The unit shall include: an Active/Bypass button with an LED indicator for each mode of operation, allowing the user to set the unit to control feedback (active mode) or remove the device from the signal path (bypass mode); and a Filter Reset button with LED indicator, so all filters may be re-configured. The product shall be equipped with a rear-mounted power switch, an power socket configured to operate at 115 VAC, balanced and unbalanced inputs on 3-pin Euroblock and combination 1/4" TRS / XLR-3 connectors, with balanced and unbalanced outputs on both 3-pin Euroblock and XLR connectors. The automatic feedback controller shall be the EUROCOM TN6232 Feedback Suppressor. (Specifications Subject to Change Without Notice) 3