Behringer UB1204FX-PRO User Manual
Behringer UB1204FX-PRO Manual
 |
View all Behringer UB1204FX-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer UB1204FX-PRO manual content summary:
- Behringer UB1204FX-PRO | User Manual - Page 1
EURORACK UB1204-PRO/UB1204FX-PRO User’s Manual Version 1.3 February 2006 - Behringer UB1204FX-PRO | User Manual - Page 2
EURORACK UB1204-PRO/UB1204FX-PRO IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear - Behringer UB1204FX-PRO | User Manual - Page 3
EURORACK UB1204-PRO/UB1204FX-PRO TABLE OF CONTENTS 1. INTRODUCTION ...4 1.1 General mixing console functions ...4 1.2 The user’s manual UB1204FX-PRO/UB1204-PRO ...9 2.4.1 Main mix outputs, Alt 3-4 outputs and control room outputs 9 2.4.2 Voltage supply, phantom power and fuse 10 3. DIGITAL EFFECTS - Behringer UB1204FX-PRO | User Manual - Page 4
EURORACK you have acquired a mixer whose small size belies its incredible versatility and audio performance. The BEHRINGER EURORACK mixing console offers you premium-quality microphone preamplifiers with optional phantom power supply, balanced line inputs and the ability to connect external effects - Behringer UB1204FX-PRO | User Manual - Page 5
EURORACK UB1204-PRO/UB1204FX-PRO 1.2 The user’s manual The user’s manual behringer.com, where you’ll find explanations of e.g. effects and dynamics applications. + The block diagram in the support area of our website (www.behringer.com). Fig Please also note the instructions in chapter 2.4.2 “ - Behringer UB1204FX-PRO | User Manual - Page 6
EURORACK UB1204-PRO/UB1204FX-PRO 2.1.4 Routing switch, solo and channel fader Fig. 2.2: The equalizer of routed, for example, to an active monitor speaker or an external effects device. The return from an external effect can then be brought back into the console via the aux return connectors. For - Behringer UB1204FX-PRO | User Manual - Page 7
EURORACK UB1204-PRO/UB1204FX-PRO LEVEL For level matching, the stereo inputs feature a LEVEL switch channel being used as an effects return should be turned fully counterclockwise, otherwise feedback problems could occur! + If you wish to use the internal effects processor, no connectors should be - Behringer UB1204FX-PRO | User Manual - Page 8
EURORACK UB1204-PRO/UB1204FX-PRO 2.3.4 Stereo aux return + If you connect a compressor or a noise gate after the 2-track output, the faders will probably not be able to create a satisfactory fade-out effect a second EURORACK or BEHRINGER ULTRALINK PRO MX882 can microphones to the mixer (or the - Behringer UB1204FX-PRO | User Manual - Page 9
EURORACK UB1204-PRO/UB1204FX-PRO + The peak meters of your EURORACK display the level virtually independent of frequency. A recording level of 0 dB is recommended for all signal types. 2.3.7 Alt 3-4 and main mix fader MODE (UB1204FX-PRO only) The MODE switch determines whether the channels’ SOLO - Behringer UB1204FX-PRO | User Manual - Page 10
EURORACK UB1204-PRO/UB1204FX-PRO 2.4.2 Voltage supply, phantom power and fuse 3. DIGITAL EFFECTS PROCESSOR Fig. 2.15: Voltage the phantom power supply has been switched on, do not connect microphones to the mixer (or the stagebox/wallbox). Connect the microphones before you switch phantom power on - Behringer UB1204FX-PRO | User Manual - Page 11
EURORACK UB1204-PRO/UB1204FX-PRO 4. INSTALLATION 4.1 Rack mounting The packaging of your mixing console contains two 19" rack mount wings which can be installed on the side panels of the - Behringer UB1204FX-PRO | User Manual - Page 12
EURORACK UB1204-PRO/UB1204FX-PRO 5. SPECIFICATIONS Mono inputs Microphone inputs (IMP “Invisible” Mic Preamp) Type left as possible, channels 2/4 as far right as possible. Reference = +6 dBu. BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these - Behringer UB1204FX-PRO | User Manual - Page 13
are not covered by this warranty: s improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Version 1.3
February 2006
User±s
Manual
EURORACK
UB1204
-
PRO
/UB1204FX
-
PRO