Behringer VT15CD Manual - Page 7
Installation
View all Behringer VT15CD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7 VIRTUBE VT30FX/VT15FX/VT15CD User Manual For practising in the rehearsal room or at home, please wire your VIRTUBE as shown in fig. 3.1. Connect a CD player or drum computer to the CD IN input. If you want to practice with headphones, connect your headphones to the LINE OUT/PHONES jack. The built-in loudspeaker will be muted automatically. Connect the dual footswitch supplied with the unit to the FOOTSWITCH jack on the VIRTUBE. The CHANNEL footswitch switches between the channels. The IN/OUT footswitch turns the effect on and off (VT30FX only). ring sleeve 4. Installation Except for the INPUT jack (1/4" TS), all audio inputs and outputs of the BEHRINGER VIRTUBE are on 1/4" TRS connectors. Please see Chapter 5, "Specifications" for more information. ◊ Please ensure that the unit is installed and operated only by people qualified to do so. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic discharge may affect the operation of the unit. tip Fig. 4.3: Stereo adapter cable sleeve tip Fig. 4.4: Mono adapter cable Unbalanced ¼" TS connector strain relief clamp sleeve tip sleeve (ground/shield) tip (signal) Fig. 4.1: 1/4" TS connector Balanced ¼" TRS connector strain relief clamp sleeve ring tip sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 4.2: 1/4" TRS connector R L tip sleeve R sleeve L tip sleeve tip