Behringer XENYX X1222USB Brochure - Page 11

XENYX X2442USB X2222USB / X1832USB X1622USB / X1222USB X1204USB / 1204USB XLR mic input with XENYX preamp X1832USB Building on the feature set of the X1622USB, the X1832USB comes with two additional mic strips (including channel inserts), for a total of six XENYX mic preamps. The onboard stereo 9-band graphic equalizer, which can be assigned to the main or monitor buses, provides superb system EQ and works Page 11 of 17 in conjunction with the FBQ feedback detection circuitry to eliminate annoying mic squeals. Other features include full-sized faders for MON and FX SENDs, along with our proprietary XPQ 3D stereo surround effect and Voice Canceller. The ultra-versatile X1832USB also has an additional Aux Send (switchable pre/post), for a total of three, and two assignable subgroups. ¼" balanced/ unbalanced input Gain control adjusts input signal level Compressor knob adjusts compression effect on channel Mid level ±15 dB, variable center frequency Mid Frequency, variable 100 Hz - 8 kHz Low EQ ±15 dB, centered @ 80 Hz Aux Sends for Monitors (1 x pre, 1 x pre/ post selectable) and FX (post) Pan control adjusts position of signal in stereo image Mute & Clip LEDs Solo & Sub/ Main assignment switches X1832USB Front Panel Low Cut filter removes unwanted infrasonics High EQ ±15 dB, centered @ 12 kHz FX Send control 9-band graphic EQ with FBQ Feedback Detection and assignment switches XPQ 3D level and assignment switch Aux 1 send control Mute switch removes signal from Main Mix Stereo Aux 1 Return level Voice Canceller switch Channel fader adjusts signal level in Main Mix Onboard FX processor, 16 presets, two parameter controls Phones/CTRL Room source mixing matrix Phones/CTRL Room level control 12-tier VU meter with +48 V and Power LEDs Monitor Send level fader FX/Aux 2 Return level fader Sub 1-2 faders Main Mix faders