Belkin F1DA104Q User Manual

Belkin F1DA104Q - OmniView PRO3 PS/2 KVM Switch Manual

Get Belkin F1DA104Q - OmniView PRO3 PS/2 KVM Switch PDF manuals and user guides
UPC - 722868650004
View all Belkin F1DA104Q manuals
Add to My Manuals
Save this manual to your list of manuals

Belkin F1DA104Q manual content summary:

  • Belkin F1DA104Q | User Manual - Page 1
    OmniView® PRO3 PS/2 KVM Switch User Manual F1DA104Qea F1DA108Qea F1DA116Qea
  • Belkin F1DA104Q | User Manual - Page 2
    the PRO3 KVM Switch 14 Connecting PS/2 Servers to the PRO3 KVM Switch 15 Connecting Multiple PRO3 KVM Switches (Daisy-Chaining) .......17 Powering Up the Systems 22 4. Using your PRO3 KVM Switch 23 Selecting a Server or BANK Using Hot-Key Commands 23 Selecting a Server Using Direct-Access Port
  • Belkin F1DA104Q | User Manual - Page 3
    Belkin 3-Year Warranty. 7 This User Manual will provide details about your new PRO3 KVM Switch, from installation and operation to troubleshooting-in the unlikely event of a problem. For quick and easy installation, please refer to the Quick Installation Guide 8 included in your PRO3 KVM Switch
  • Belkin F1DA104Q | User Manual - Page 4
    �h Rack�-M�o�u�n��tB�ra�c�k�ets with�Sc��re�w��s �(�F�1�D��A�108Qea, F�1�D��A�11�6��Q�e�a�o�n�ly D�B�9�-t�o��-R��J1�1��� S�er�ia��l�F��l�a�s�h��� Cable Use�r �M�a�n��ua�l���� Quick Inst�al�la��ti�o�n Guide 12V DC,1�A�P�o��w�er� Supply Pow�e�r��Ca�b�le��w��it�h�S�ch��uko plug Power
  • Belkin F1DA104Q | User Manual - Page 5
    visual means of switching between servers and assigning the hot-key scheme. The OSD can also be set up to support regional languages. • Front-Panel Push Buttons Direct-access port selectors, located conveniently on the front panel of the PRO3 KVM Switch, allow for simple, manual port-selection. 3
  • Belkin F1DA104Q | User Manual - Page 6
    install the latest firmware on your PRO3 KVM Switch. This enables your KVM Switch to maintain consistent compatibility with the latest devices and servers. Firmware upgrades are free for the life of your PRO3 KVM Switch and can be downloaded from Belkin's support website at www.belkin.com/support. 4
  • Belkin F1DA104Q | User Manual - Page 7
    section Overview Equipment Requirements 1 Cables: 2 Connecting the PRO3 KVM Switch to a server requires a Belkin Dual-Port Micro-Cable Kit. Belkin Dual-Port Micro-Cable Kits: 3 F1D9400-XX (PS/2-style) 4 5 6 7 8 Belkin PRO3 Daisy-Chain Cable: F1D108-CBL (Available in a 2 feet
  • Belkin F1DA104Q | User Manual - Page 8
    OS Platforms The PRO3 KVM Switch is compatible with CPUs running on, but not limited to, the following OS platforms: • Windows® NT®, 2000, XP, Server 2003, or VistaTM • Microsoft® DOS 5.x and above • Red Hat® Linux® 8.x and above • Novell® NetWare® 5.x Keyboards • PS/2-compatible • Supports 101-/102
  • Belkin F1DA104Q | User Manual - Page 9
    section Overview Unit Display Diagrams 1 Front View of the PRO3 KVM Switch: 2 (F1DA108Qea) 3 4 5 6 7 8 7
  • Belkin F1DA104Q | User Manual - Page 10
    Overview Unit Display Diagrams Back View of the PRO3 KVM Switch: 8
  • Belkin F1DA104Q | User Manual - Page 11
    Overview Specifications 1 Part No.: Enclosure: Power: F1DA104Qea, F1DA108Qea, F1DA116Qea Metal enclosure with high-impact 2 plastic faceplate 12V DC, 1A power adapter, center-pin-positive 3 polarity Daisy-Chain: Maximum of 16 OmniView KVM Switches 4 No. of Servers Supported: 4, 8, and
  • Belkin F1DA104Q | User Manual - Page 12
    and/or the PRO3 KVM Switches. Belkin is not responsible for damage caused in this way. You are now ready to begin installation of your PRO3 KVM Switch. The following sections (pages 11-16) provide complete instructions for the hardware setup of a single PRO3 KVM Switch (F1DA104Qea, F1DA108Qea
  • Belkin F1DA104Q | User Manual - Page 13
    diagram below.) Note: If this PRO3 KVM Switch will be daisy-chained to another KVM switch, set the BANK address prior to installing on a rack. Refer to the section in this User Manual titled "Connecting Multiple PRO3 KVM Switches (Daisy-Chaining)". Your PRO3 KVM Switch is now mounted securely into
  • Belkin F1DA104Q | User Manual - Page 14
    Installation Optional Bracket Installation (F1DA104Qea) The PRO3 4-Port KVM Switch can be installed into a 19-inch server rack using an optional OmniView Rack-Mount Kit (F1D005). Step 1 Attach the rack-mount bracket to your 4-Port PRO3 KVM Switch using the Phillips screws provided. (Refer to diagram
  • Belkin F1DA104Q | User Manual - Page 15
    7 set the BANK address prior to installing on a rack. Refer to the section titled 8 "Connecting Multiple PRO3 KVM Switches (Daisy-Chaining)" in this User Manual. Your PRO3 KVM Switch is now mounted securely to the rack and you are ready to connect the console. Note for Belkin PRO2 Series Owners
  • Belkin F1DA104Q | User Manual - Page 16
    in the "Console" section. (Refer to diagram below.) Step 3 Connect the PS/2 mouse cable to the mouse port on the back of the PRO3 KVM Switch in the "Console" section. (Refer to diagram below.) Step 4 Attach the power adapter to the DC power jack labeled "12VDC, 1A" located on the rear panel of the
  • Belkin F1DA104Q | User Manual - Page 17
    connect 4 your servers. 5 Connecting PS/2 Servers to the PRO3 KVM Switch 6 Step 1 Make sure your server is powered off. 7 Step 2 Using the Belkin Dual-Port Micro-Cable Kit for PS/2 (F1D9400-XX), connect the 8 VGA connector to the monitor port on your server. (Refer to diagram below.) Step
  • Belkin F1DA104Q | User Manual - Page 18
    4 Connect the Belkin Dual-Port Micro-Cable Kit for PS/2 to the desired host ports on the PRO3 KVM Switch. (Refer to diagram below.) Step 5 Power up your server. Step 6 Repeat Steps 1 through 5 for each additional PS/2 server you wish to connect. Note: This KVM Switch does NOT support USB connection
  • Belkin F1DA104Q | User Manual - Page 19
    7 8 cable 1 Primary unit (BANK 00) cable 2 Secondary unit (BANK 01) cable 3 Secondary unit (BANK 02) Secondary unit (BANK 03) Note: A Daisy-Chain Cable (F1D108-CBL) is required to daisy-chain each PRO3 KVM Switch and is available through your Belkin reseller, or online at www.belkin.com. 17
  • Belkin F1DA104Q | User Manual - Page 20
    3 BANK 4 BANK 5 BANK 6 BANK 7 BANK 8 BANK 9 BANK 10 BANK 11 BANK 12 BANK 13 BANK 14 BANK 15 PRIMARY (default) SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY SECONDARY Example: Four 8-Port PRO3 KVM Switches
  • Belkin F1DA104Q | User Manual - Page 21
    cable 1 Primary unit (BANK 00) 3 4 Secondary unit (BANK 01) cable 2 5 6 Secondary unit (BANK 02) cable 3 7 Secondary unit (BANK 03) 8 Getting Started: Step 1: Make sure that all servers and PRO3 KVM Switches are powered off and that each PRO3 KVM Switch has been assigned a unique BANK
  • Belkin F1DA104Q | User Manual - Page 22
    Daisy-Chain Out" port of the next secondary KVM switch(for example, BANK 02). Step 4 Repeat Step 3 for additional PRO3 KVM Switches you wish to daisy-chain together. Note: Your PRO3 KVM Switch is backward-compatible with Belkin OmniView PRO2 KVM Switches with standard cabling (F1DA104Tea, F1DA108Tea
  • Belkin F1DA104Q | User Manual - Page 23
    all servers to the primary and secondary KVM switches. 2 Refer to the "Connecting PS/2 Servers to the PRO3 KVM Switch" section on page 15 for instructions. Step 2: 3 Power up the secondary KVM switches sequentially, beginning with the highest BANK, by connecting each unit's power supply. Each
  • Belkin F1DA104Q | User Manual - Page 24
    Installation Powering Up the Systems Verify that all servers connected to the PRO3 KVM Switch are powered on. If any connected servers have not been powered on, it is okay to do so at this time. The PRO3 KVM Switch emulates both a mouse and keyboard on each port and allows your server to boot
  • Belkin F1DA104Q | User Manual - Page 25
    a single-switch configuration (no daisy-chained KVM switches), you can switch directly to any port by entering the 2-digit number of the port you wish to access. For example, if you press "Scroll Lock", "Scroll Lock", "02", the PRO3 KVM Switch will switch to the server on Port 2 located on BANK 00
  • Belkin F1DA104Q | User Manual - Page 26
    PRO3 KVM Switch With a daisy-chain switch configuration, you can switch between BANKs (KVM switches) by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the previous BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to the next BANK. With a daisy-chain switch
  • Belkin F1DA104Q | User Manual - Page 27
    which server you wish to control by pressing the direct-access port selector next to the corresponding port. The LED will illuminate to indicate the port is currently selected. If you are installing multiple 3 PRO3 KVM Switches that are daisy-chained, use the BANK scroll keys located on the
  • Belkin F1DA104Q | User Manual - Page 28
    on the keyboard. Note: There is no mouse or keyboard control in AutoScan mode. This is necessary to prevent data and synchronization errors. If the user is using the mouse or keyboard when the PRO3 KVM Switch is switching between ports, data flow may become interrupted and could result in erratic
  • Belkin F1DA104Q | User Manual - Page 29
    by the 3 PRO3 KVM Switch, and does not affect the function of your server, operating system, or software function. 4 Main OSD Page 5 6 7 8 The main OSD menu displays the current selected BANK and connected servers to that BANK. If you have only one PRO3 KVM Switch in your configuration
  • Belkin F1DA104Q | User Manual - Page 30
    Using your PRO3 KVM Switch To switch servers using the main OSD menu, use the arrow keys on your keyboard to navigate to the desired server, and press the "Enter" key. A " " symbol indicates which server is currently being accessed on your console. To select a different BANK, press the "Page Up" or
  • Belkin F1DA104Q | User Manual - Page 31
    PRO3 KVM Switch The default language is set to English. To designate a different language, use the 1 arrow keys to navigate to the desired language field, and then press "Enter" to select and save the entry. Port Name Edit 2 This option allows you to name each port Password: belkin 8 Note
  • Belkin F1DA104Q | User Manual - Page 32
    Using your PRO3 KVM Switch Access List This feature allows you to discretely specify the user access at a port level. Only the administrator can set up the access list. The column on the left lists the port names. The users are listed by their number (1 to 8). Navigate to the user and port, and
  • Belkin F1DA104Q | User Manual - Page 33
    can be used for your PRO3 KVM Switch: 2 Command Function 3 Space Bar Activate OSD Previous host 4 Next host [01,02.,,,16] port Non-daisy-chain KVM switch 5 [00,01.,,,15] BANK Daisy-Chain Config: First and second digit specifies BANK [01,02.,,,16] port Daisy-Chain: Third and fourth
  • Belkin F1DA104Q | User Manual - Page 34
    and utility from www.belkin.com/support/. The utility will guide you through the process of updating the firmware on your PRO3 KVM Switch. Warning! We strongly recommend that you update your firmware only if you are experiencing mouse and keyboard problems with your PRO3 KVM Switch, as reconfiguring
  • Belkin F1DA104Q | User Manual - Page 35
    Using your PRO3 KVM Switch 4. Run "BELKIN Firmware Upgrade Utility.exe". Click "Browse" to select the FW 1 upgrade file. Make sure the Comm-port setting matches the port where the Serial Flash Cable is connected. 2 3 4 5 6 7 5. Apply power to the PRO3 KVM Switch. The KVM Switch will enter
  • Belkin F1DA104Q | User Manual - Page 36
    version on the market with the latest features and enhancements. See the "Updating Firmware" section in this User Manual. Q: Does the PRO3 KVM Switch support Microsoft IntelliMouse®? A: The PRO3 KVM Switch supports PS/2 mice from Microsoft, Logitech®, Kensington®, etc., and Belkin. Please contact
  • Belkin F1DA104Q | User Manual - Page 37
    drivers or software to be installed in your servers. Simply connect all your servers to the Belkin KVM Cable Kits, and then attach one keyboard, monitor, and mouse to the 2 console port, and it is ready for use. Q: Does the PRO3 KVM Switch require an AC adapter? 3 A: Yes, the PRO3 KVM Switch
  • Belkin F1DA104Q | User Manual - Page 38
    at boot up. • Check that the keyboard cable on the PRO3 KVM Switch is completely connected to your server. Tighten any loose connections. • Try booting the problem computer while the port is selected and wait until the operating system loads before switching away to another computer. • If you are
  • Belkin F1DA104Q | User Manual - Page 39
    Troubleshooting section The mouse is lost when I switch to a different port. 1 • Check that the mouse you are using is connected properly to the console port of the PRO3 KVM Switch. • Tighten any loose cable connections. 2 • If you are using a mouse driver that was included with your mouse,
  • Belkin F1DA104Q | User Manual - Page 40
    be used to control and configure the KVM switch. Port: An interface receptor on a server through which you can attach a device or plug in a device cable. Primary KVM Switch: The KVM switch that is connected to the console and is set to BANK address 00. Secondary KVM Switch: Any KVM switch that is
  • Belkin F1DA104Q | User Manual - Page 41
    FCC Statement 1 DECLARATION OF CONFORMITY WITH FCC RULES FOR 2 ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the products: 3 F1DA104Q, F1DA108Q, F1DA116Q to which this declaration relates
  • Belkin F1DA104Q | User Manual - Page 42
    receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall
  • Belkin F1DA104Q | User Manual - Page 43
    41
  • Belkin F1DA104Q | User Manual - Page 44
    OmniView® PRO3 KVM Switch Belkin Tech Support UK: 0845 607 77 87 Europe: www.belkin.com/support Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk Netherlands +31 (0) 20
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
OmniView
®
PRO3 PS/2
KVM Switch
User Manual
F1DA104Qea
F1DA108Qea
F1DA116Qea