Belkin F5D7010_V4 User Manual - Page 14
Diagnostics
View all Belkin F5D7010_V4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
USING THE BELKIN WIRELESS LAN UTILITY (d) WEP Will display "Off" when encryption is disabled, "64-bit" when 64-bit encryption is enabled, and "128-bit" when 128-bit encryption is enabled. (e) Ad-Hoc Networks Only Check this box to display available ad-hoc networks only. (f) Advanced Displays additional information about the selected network. (g) Freeze Takes a "snapshot" of the signal strength at the time of the site survey. Click again to unfreeze. USING THE BELKIN WIRELESS LAN UTILITY Diagnostics Page This Page allows you to perform several diagnostic tests that are available for your Belkin Wireless Network adapter. Control Registers This test verifies the read and write capabilities of the network controller registers by writing various values to the registers and verifying the result. The device driver uses these registers to perform network functions such as sending and receive information. If the test fails, the network adapter may not work properly. SPROM Format Version This test verifies the content of the SPROM by reading a portion of the SPROM and computing the checksum. The test fails if the computed checksum is different than the checksum stored in the SPROM. 24 25