Beltronics Vector 940 Owner's Manual - Page 9

Details of Programming City Mode Sensitivity City STD (Standard) In this setting, when you put your V940 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put your V940 in the City mode, X-band sensitivity is reduced more than the standard setting.This will reduce X-band alarms from other sources even further, but also significantly reduces range to X-band traffic radar. Bands BandsDFT In this setting, all North American radar and laser frequencies are monitored.This is the factory setting and it is recommended that you use your V940 in this mode. BandsMOD In this setting, your V940 will warn you with an audible alert, and associated text message stating which band has changed from the original factory setting (i.e."SWS ON").This warning is displayed during the start up sequence (standard or fast). Technical Details Features and Specifications Operating Bands • X-band 10.525 GHz ± 25 MHz • K-band 24.150 GHz ± 100 MHz • Ka-band 34.700 GHz ± 1300 MHz • Laser 904nm, 33 MHz bandwidth Radar Receiver / Detector Type • Superheterodyne,VTO • Scanning Frequency Discriminator • Digital Signal Processing (DSP) Laser Detection • Quantum Limited Video Receiver • Multiple Laser Sensor Diodes Display Type • 280 LED Alphanumeric • Bar Graph • 3 Levels of Brightness, plus Dark Mode Power Requirement • 12VDC, Negative Ground • Power cord (included) Programmable Features • Power-On Indication • Voice Alerts • Power-On Sequence • AutoMute • City Mode Sensitivity • Bands Sensitivity Control • Highway and City Auto Calibration Circuitry VG2 Immunity Dimensions (Inches) • 1.25 H x 2.75 W x 4.75 L 14 15