Beltronics Vector 965 Owner's Manual - Page 8

Programming There are 6 user-selectable options so you can customize your V965 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PGM, RVW, and CHG are located on the top of the detector, and are highlighted in colored graphics. Pages 14-16 explain each option in more detail. How to use Programming 1 To enter Program Mode, press and hold both the CITY and BRT buttons down for 2 seconds. (The unit will beep twice, and will display the word Program). 2 Then press the RVW button to review the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 4 To leave the Program Mode, simply wait 8 seconds without pressing any button, or press the PWR button. (The unit will display Complete, beep 4 times, and return to normal operation). An example Here is how you would turn V965's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and BRT buttons down for 2 seconds. V965 will beep twice and display Program. 2 Then hold the RVW button down. V965 will scroll through the categories, starting with Pilot ( Pilot), Voice (Voice), Power-on sequence ( PwrOn), and then AutoMute (aMute). 3 Release the RVW button when V965 shows the AutoMute item. Since the factory setting is for AutoMute to be on, V965 will display aMute ON. (If you accidentally don't release the RVW button in time, and V965 goes to the next category, hold the RVW button down again, and after V965 scrolls through all categories, it will begin again at the top of the list.) 4 Press the CHG button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The V965 will display Complete, beep 4 times, and return to normal operation. 12 Overview of Programming Press the REVIEW button to go from one category to the next PILOT (Power-on indication) Pilot HWY Pilot H Press the CHANGE button to change your setting within a category * Full word: Highway or AutoScan or City Letter: H or A or C VOICE Voice ON Voice OFF * Voice alerts on Voice alerts off POWER-ON SEQUENCE PwrOn STD PwrOn FST * Standard power-on sequence Fast power-on sequence AUTOMUTE aMute ON aMute OFF * AutoMute on AutoMute off CITY MODE SENSITIVITY City STD City LoX City NoX * Standard City mode sensitivity Low X band sensitivity in City Mode No X band sensitivity in City Mode BANDS Bands DFT Bands MOD * Factory default settings Factory default settings modified * Factory Default Settings To reset V965 to its original factory settings, press and hold the "CITY" and "BRT" buttons while turning the power on. V965's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. Turn bands "ON" or "OFF" by pressing the VOLUME/MUTE button POP ON or OFF (default is off) SWS ON or OFF (default is off) 13