BenQ BL2711U 2711U User Manual - Page 12
Connect the PC video cable., System, DisplayPort
View all BenQ BL2711U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. Connect the PC video cable. To Connect the DVI-D Cable Connect the plug of the DVI-D cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. To Connect the HDMI Cable Or Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. To Connect the DP Cable Or Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. If the image is not displayed, go to System, DisplayPort and change the setting to 1.1. And then connect the cable again. The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. 3. Connect the audio cable. Connect the audio cable between the socket on the rear of the monitor (Line In) and your computer audio outlet. 12 How to assemble your monitor hardware