BenQ EW2750ZL User Manual - Page 12
Connect the PC video cable., To Connect the D-Sub Cable
View all BenQ EW2750ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. Connect the PC video cable. To Connect the D-Sub Cable Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. To Connect the HDMI Cable Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. Either Or To Connect the MHL Cable (selected models only) Or Connect the plug of the MHL cable to the HDMI / MHL port of the monitor. Connect the other end of the cable to the MHL port of the digital output device. Not all mobile devices are MHL-enabled, consult with your mobile device dealer to verify MHL capabilities. If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection. - Better quality: HDMI, MHL - Good quality: D-Sub The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. 12 How to assemble your monitor hardware