BenQ Joybee GP1 User Manual

BenQ Joybee - SVGA DLP Projector Manual

Get BenQ Joybee - SVGA DLP Projector PDF manuals and user guides
UPC - 840046016319
View all BenQ Joybee manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ Joybee manual content summary:

  • BenQ Joybee | GP1 User Manual - Page 1
    Joybee GP1 Mini Projector User Manual Welcome
  • BenQ Joybee | GP1 User Manual - Page 2
    back photos and movies .........42 "PC-less" presentations 43 Using USB Reader menus 44 USB Reader menu operation 46 Projection with iPod Dock (Optional Accessory)........51 Maintenance 52 Care of the projector 52 Troubleshooting 54 Specifications 55 Projector specifications 55 Dimensions
  • BenQ Joybee | GP1 User Manual - Page 3
    the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel.
  • BenQ Joybee | GP1 User Manual - Page 4
    Safety Instructions (Continued Never replace any electronic components unless the projector is unplugged. 9. Do not attempt to disassemble this projector. There with live parts. Refer servicing only to suitably qualified professional service personnel. 10. When the projector is under operation, you
  • BenQ Joybee | GP1 User Manual - Page 5
    the projector on end above 60°C / 140°F vertically. Doing so may cause the - Locations where the altitudes are higher projector to fall over, causing injury or than 12000 m (40000 feet). resulting in damage to the projector. 12000 m (40000 feet) 0 m (0 feet) Important safety instructions 5
  • BenQ Joybee | GP1 User Manual - Page 6
    accidents and possible injury. 16. Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail. If the projector does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 6 Important safety instructions
  • BenQ Joybee | GP1 User Manual - Page 7
    use. The projector offers the following features. • USB reader making photo and movie play quick • Ability to display 16.7 million colors • Multi-language On-Screen Display (OSD) menus • depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly
  • BenQ Joybee | GP1 User Manual - Page 8
    your dealer for detailed information. Projector Power cord Multi-input cable AC adapter Safety manual Quick start guide User manual CD Warranty card* Pull the tab before using the remote control. Projector carrying Remote control bag with battery Optional accessories 1. iPod Dock with
  • BenQ Joybee | GP1 User Manual - Page 9
    panel (See "Projector" on page 10 for details.) 2. Vent (heated air exhaust) 3. Front IR remote sensor 4. Focus ring 4 5. Projection lens 5 Rear/lower side 6 7 9 6. Multi-input socket -RGB (PC)/Component video (YPbPr/ YCbCr) /Composite video/ Audio input (L/R) 7. USB Reader slot 8. Audio
  • BenQ Joybee | GP1 User Manual - Page 10
    page 31 for details. 3. Power and Ring LED indicator See "Selecting a picture mode" on page the On-Screen Display (OSD) menu "Switching input signal" on page 25 for is activated, the back to USB Reader main menu. Goes back to previous OSD menu. Press for three seconds to display Projector Menu
  • BenQ Joybee | GP1 User Manual - Page 11
    Down) 6 9 Manually corrects distorted images input signal" on page 25 for details. 9. MODE/ENTER 1. II POWER Depending upon which input signal is selected, selects an available picture setup Toggles the projector PROJECTOR on page 22 for details. 2. FREEZE USB movie. Enacts the selected USB
  • BenQ Joybee | GP1 User Manual - Page 12
    sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. Replacing the remote control battery 1. Pull out the battery holder. Please follow the illustrated instructions. Push and hold the locking arm while pulling out the
  • BenQ Joybee | GP1 User Manual - Page 13
    projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of this projector BenQ has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the ideal location for your projector.
  • BenQ Joybee | GP1 User Manual - Page 14
    There is 3% tolerance among these numbers due to optical component variations. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make
  • BenQ Joybee | GP1 User Manual - Page 15
    final connection path should be like that shown in the following diagram: Notebook or desktop computer Multi-input cable Audio cable Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on
  • BenQ Joybee | GP1 User Manual - Page 16
    of matching terminals on both the projector and the Video source device as described below: Best video quality The best available video connection method is Component Video (not to be confused with composite Video). Digital TV tuner and DVD players output Component Video natively, so if available on
  • BenQ Joybee | GP1 User Manual - Page 17
    other end of the Component Video to VGA (D-Sub) adaptor cable (with a D-Sub type connector) to the multi-input cable. 3. Connect the multi-input cable to the multi-input socket on the projector. 4. If you wish to make use of the projector speaker, take a suitable audio cable and connect one end of
  • BenQ Joybee | GP1 User Manual - Page 18
    , and the other end to the audio input sockets of the multi-input cable. The final connection path should be like that shown in the following diagram: AV device Multi-input cable Video cable Audio cable • If the selected video image is not displayed after the projector is turned on and the correct
  • BenQ Joybee | GP1 User Manual - Page 19
    it is a USB memory stick or portable 2.5" hard disk drive. To connect the projector to a USB Reader source device: 1. Connect a USB Reader source device to the USB slot on the projector. 2. If you wish to make use of a speaker or other audio input equipment, take a suitable audio cable and connect
  • BenQ Joybee | GP1 User Manual - Page 20
    to an iPod Dock source device 1. Dock your iPod to fit the iPod connector. 2. Connect the iPod Dock cable into the multi-input socket on the projector. The final connection path should be like that shown in the following diagram: iPod Dock device • See "Projection with iPod Dock (Optional Accessory
  • BenQ Joybee | GP1 User Manual - Page 21
    II Power on the projector or remote control to start the projector. The Power, Ring and Key LED indicators light blue when the projector is on. The of the connected equipment on. 7. The projector will start to search for input signals. The current input signal being scanned displays in the upper left
  • BenQ Joybee | GP1 User Manual - Page 22
    menu. Main menu icon Main menu Highlight Sub-menu Current input signal Status Press MENU/ EXIT to the previous page or to exit. To use the OSD menus, please set them to your familiar language first. 1. Press MENU/EXIT on the projector or 3. Highlight Language and press remote control to turn
  • BenQ Joybee | GP1 User Manual - Page 23
    Settings page. The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured
  • BenQ Joybee | GP1 User Manual - Page 24
    projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service password. The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after
  • BenQ Joybee | GP1 User Manual - Page 25
    static images are generally brighter than "Video" using mostly moving images (movies). • The input signal type effects the options available for the Picture Mode. See "Selecting a picture mode" on page 28 for details. • The native display resolution of this projector is in a 4:3 aspect ratio. For
  • BenQ Joybee | GP1 User Manual - Page 26
    image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the
  • BenQ Joybee | GP1 User Manual - Page 27
    format of the video signal and your display requirements. About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector
  • BenQ Joybee | GP1 User Manual - Page 28
    like computer monitors, standard definition TV and 4:3 aspect 4:3 picture DVD movies, as it displays them without aspect alteration. 5. 16:9: Scales an image The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input
  • BenQ Joybee | GP1 User Manual - Page 29
    calibrated camera, and for viewing PC graphic and drawing applications such as AutoCAD. 4. Movie mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. 5. User mode: Recalls the
  • BenQ Joybee | GP1 User Manual - Page 30
    you have previously adjusted the Brightness setting to suit your selected input and viewing environment. +30 0 -30 Adjusting Color Highlight Color in the PICTURE menu and adjust the values by pressing / on the projector or remote control. Lower setting produces less saturated colors. If the
  • BenQ Joybee | GP1 User Manual - Page 31
    action taken on the blank screen. Once BLANK is pressed, the projector enters Economic mode automatically. Do not block the projection lens from projecting any key on the projector or remote control. Even if an image is frozen on the screen, the pictures are running on the video or other device. If
  • BenQ Joybee | GP1 User Manual - Page 32
    the sound The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connection" on page 15 for how the audio input is connected. Muting the sound To temporarily turn off the sound: 1. Press MENU
  • BenQ Joybee | GP1 User Manual - Page 33
    lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. 3. Once the cooling process finishes, the Power LED indicator flashes blue slowly and Ring LED indicator lights blue and fans stop. 4. Disconnect the power cord from the wall socket if the
  • BenQ Joybee | GP1 User Manual - Page 34
    /Movie/Photo/ User Language Quick Auto Search Projector Position Menu display time Menu Settings Menu position Security Settings Information Reset All Settings Menu Type Change password Change Security Settings • Power on Lock FAQ-Image and Installation FAQ-Features and Service
  • BenQ Joybee | GP1 User Manual - Page 35
    Auto Search Test Pattern Language 4. SYSTEM SETUP: Basic Projector Position Auto Power Off Blank Timer Sleep Timer Splash Screen Blackboard Full Screen/4:3/16:9/Auto/Real On/Off Brightest/PC/Movie/Photo/ User Brightest/PC/Movie/Photo/ User T1/T2/T3 On/Off On/Off hr BenQ/Black/Blue Operation 35
  • BenQ Joybee | GP1 User Manual - Page 36
    All Settings FAQ-Image and Installation FAQ-Features and Service 6. Current System Status • Source INFORMATI • Picture Mode ON • Resolution • Color System • System Hour • FW Version Note that the menu items are available when the projector detects at least one valid signal. If there is
  • BenQ Joybee | GP1 User Manual - Page 37
    is not white. See "Using Wall Color" on page 30 for details. There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 27 for details. Auto corrects any keystoning of the image. Corrects any keystoning of the image
  • BenQ Joybee | GP1 User Manual - Page 38
    Brightest) Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a "Adjusting Tint" on page 30 for details. The function is only available when Video with NTSC system is selected. Adjusts the image to make it look sharper or
  • BenQ Joybee | GP1 User Manual - Page 39
    Power Off (Disable) Blank Timer (Disable) Sleep Timer (Disable) Splash Screen (BenQ logo) DESCRIPTION (default setting/value) See "Switching input signal" on page 25 for details. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size
  • BenQ Joybee | GP1 User Manual - Page 40
    function" on page 23 for details. Returns all settings to the factory preset values. The following settings will still remain: Position, Phase, H. Size, , User, Language, Projector Position, High Altitude Mode, Security Setting. 40 Operation
  • BenQ Joybee | GP1 User Manual - Page 41
    and Service Displays possible solutions to problems you may encounter. Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Current System Status Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC
  • BenQ Joybee | GP1 User Manual - Page 42
    and movies. Entering USB Reader main screen 1. Connect your USB Reader into the projector. 2. Turn on the projector, if it is not already on. The projector will automatically search for USB Reader signal if the Quick Auto Search function in the SOURCE menu is On. You may also manually select USB
  • BenQ Joybee | GP1 User Manual - Page 43
    present sheets and graphics. 1. Open your PowerPoint file. 2. Click "File" and select "Save As". 3. Save the file in your USB Reader, select "*.jpg" as file type and then click "Save". 4. Insert your USB Reader into the USB Reader slot on the projector. 5. Execute "PC-less" presentations from your
  • BenQ Joybee | GP1 User Manual - Page 44
    screen is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the Photo Setting menu. In USB Reader mode, be sure to use keys included in USB READER on the remote control for function control and menu adjustments. 44 Presenting From
  • BenQ Joybee | GP1 User Manual - Page 45
    To use USB Reader OSD menus, please set them to your familiar language first. 1. Press SETTING. • You can also highlight Settings and press SELECT/ to * to leave and save the settings. • You can also directly press SETTING in step 6 to leave and save the settings. Presenting From a USB Reader 45
  • BenQ Joybee | GP1 User Manual - Page 46
    Reader menu operation USB Reader menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Interval Time 1. Photo Setting 2. Auto Play Transition Effect Show Type Slide Mode Photo Movie Volume On/Off On/Off 0 - 10 Options
  • BenQ Joybee | GP1 User Manual - Page 47
    (Off) Sets to whether to initiate the automatic play function after entering "Movie" mode. If this setting is set to "On", the system will automatically play the video after entering "Movie"; if it is set to "Off ", then the system will enter File Manager mode. Presenting From a USB Reader 47
  • BenQ Joybee | GP1 User Manual - Page 48
    On-Screen Display (OSD) menus. 3. Custom Setup menu Subtitle Language Repeat Mode Default 4. Exit See "Using USB Reader menus" on page 44 for details. * The language options vary depending on regions. Sets the character encoding of the languages. Sets the play repeat
  • BenQ Joybee | GP1 User Manual - Page 49
    USB Reader support format Photo Extension Detail .jpeg .bmp .gif .tiff Baseline JPEG WxH = 14592x12288, Up to 179 Mega-pixel Support format: 444/ 440/ 422/ 420/ Grayscale max. file size = 40MB Progressive JPEG Up to 4 Mega-pixel Support format: 444/ 440/ 422/ 420/ Grayscale max. file size = 40MB
  • BenQ Joybee | GP1 User Manual - Page 50
    Extension .dat/ .mpg Video Codec MPEG-1/ 2 Audio Codec MPEG layer 1/ 2 .vob MPEG-1/ 2 AC3 .avi Movie XviD/ 3ivX MS ISO MPEG4 MPEG layer 1/ 2 uLaw/ aLaw/ PCM (8-bit . 720x480 @ 30fps PAL: max. 720x576 @ 25 fps Baseline JPEG :VGA @ 30fps Format SMI SRT SUB Subtitle ASS SSA PSB Note Text File
  • BenQ Joybee | GP1 User Manual - Page 51
    iPod Dock. Multimedia base features iPod Dock, which brings your music, videos and photos together. 1. Dock your iPod to fit the iPod connector. 2. Connect the iPod Dock cable into the multi-input socket on the projector. 3. Turn on your iPod and projector. 4. Select your music, videos and photos
  • BenQ Joybee | GP1 User Manual - Page 52
    please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 55 or consult your dealer about the range. • Retract the adjuster feet. • Remove the battery from the remote
  • BenQ Joybee | GP1 User Manual - Page 53
    Indicators Status / Problems Standby Power on Cooling Fan1 error Fan2 error Temperature error LED indicators Ring Power Key Blue Blue Blue Blue slow flash Blue slow flash Blue slow flash Blue slow flash Off Blue On Blue fast flash
  • BenQ Joybee | GP1 User Manual - Page 54
    Troubleshooting The projector does not turn on. Cause There is no power from the power cable. Attempting to turn the projector on again during the cooling process. No picture Cause The video source is not turned on or connected correctly. The projector is not correctly connected to the input signal
  • BenQ Joybee | GP1 User Manual - Page 55
    Input terminal Multi-input Computer input Component input Video input Audio input USB-A type iPod input D-Sub 15-pin (female) x 1 Analog - D-Sub Component RCA jack x 3 (through RGB input) RCA jack x 1 RCA jack x 2 For USB Reader. Supports photo and movie files. iPod Dock with cable (optional
  • BenQ Joybee | GP1 User Manual - Page 56
    (W) x 57 mm (H) x 120 mm (D) 136 120 57 Timing chart 35.3 28.4 Supported timing for PC input Mode Resolution 640 x 480 VGA 720 x 400 SVGA 800 x 600 .80 67.50 49.70 60.00 63.98 Supported timing for Component-YPbPr/Video input Video mode 480i 480p 576i 576p 720p 720p 1080i 1080i Horizontal
  • BenQ Joybee | GP1 User Manual - Page 57
    replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions
  • BenQ Joybee | GP1 User Manual - Page 58
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and
  • BenQ Joybee | GP1 User Manual - Page 59
    computer systems correctly. • Some models of BenQ's monitors and projectors contain additional USB and DVI ports for connection to more devices such as a special headphone to assist the hearing impaired. • All BenQ monitors and projectors come with user manuals on compact discs which could be easily
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Welcome
Joybee GP1 Mini Projector
User Manual