BenQ MX511 DLP Projector User Manual

BenQ MX511 DLP Projector Manual

Get BenQ MX511 DLP Projector PDF manuals and user guides View all BenQ MX511 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ MX511 DLP Projector manual content summary:

  • BenQ MX511 DLP Projector | User Manual - Page 1
    MS510/MX511 Digital Projector User Manual Welcome
  • BenQ MX511 DLP Projector | User Manual - Page 2
    of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 9 Controls and projector menu display 42 Shutting down the projector 42 Menu operation 43 Maintenance 55 Care of the projector 55 Lamp information 56 Troubleshooting
  • BenQ MX511 DLP Projector | User Manual - Page 3
    the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service
  • BenQ MX511 DLP Projector | User Manual - Page 4
    you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 12. When the projector is under operation, you may sense some heated air
  • BenQ MX511 DLP Projector | User Manual - Page 5
    Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector. - Locations where
  • BenQ MX511 DLP Projector | User Manual - Page 6
    may cause it to fail. If the resulting in damage to the projector. projector does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to the
  • BenQ MX511 DLP Projector | User Manual - Page 7
    process • Selectable password protected function • 3D color management allowing color adjustments to your liking • Selectable quick cooling function makes the projector cool in a shorter time • Presentation timer for better control of time during presentations • One-key auto-adjustment to display
  • BenQ MX511 DLP Projector | User Manual - Page 8
    . *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Pull the tab before using the remote control. Remote control with battery Optional accessories
  • BenQ MX511 DLP Projector | User Manual - Page 9
    exterior view Front/upper side 1 2 3 4 5 Rear/lower side 10 11 12 13 14 15 16 1. External control panel (See "Projector" on page 10 for details.) 2. Lamp cover 3. Zoom ring 4. Focus ring 5. Lens cover 6 6. Vent (heated air exhaust) 7. Front IR remote sensor 8. Projection lens 9. Quick
  • BenQ MX511 DLP Projector | User Manual - Page 10
    developed a 10. problem. See "Indicators" on page 61 for details. 4. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting page 61 for detail. TEMPerature indicator light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 61 for
  • BenQ MX511 DLP Projector | User Manual - Page 11
    safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling, we strongly recommend that you use a proper fitting BenQ projector ceiling mount kit and that you ensure it is securely and safely installed. If you use a non-BenQ
  • BenQ MX511 DLP Projector | User Manual - Page 12
    II Power 11. Toggles the projector between standby mode and on. See "Starting up the projector" on page 24 and "Shutting down the projector" on page 42 for for details. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting
  • BenQ MX511 DLP Projector | User Manual - Page 13
    obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the rear Approx. 15° Approx. 15° Replacing the remote control battery 1. Pull out the battery holder. Please follow the illustrated instructions. Push and hold the locking arm while pulling
  • BenQ MX511 DLP Projector | User Manual - Page 14
    and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the
  • BenQ MX511 DLP Projector | User Manual - Page 15
    -angle square) to the horizontal center of the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects at a slightly downward angle. You can see from the
  • BenQ MX511 DLP Projector | User Manual - Page 16
    This method can be used for situations where you have purchased this projector and would like to know what screen size will fit in your the physical space available in your room. 1. Measure the distance between the projector and where you want to position the screen. This is the projection distance
  • BenQ MX511 DLP Projector | User Manual - Page 17
    Projection dimensions Refer to "Dimensions" on page 64 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance Screen size Distance from screen (mm) Diagonal W H Min
  • BenQ MX511 DLP Projector | User Manual - Page 18
    cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • For detailed connection methods, see pages 19-23. 11
  • BenQ MX511 DLP Projector | User Manual - Page 19
    on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 19. 2. Take a suitable VGA cable
  • BenQ MX511 DLP Projector | User Manual - Page 20
    be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker. When you connect audio output signal from a video source device, please set the audio output in dual track to obtain an optimal sound
  • BenQ MX511 DLP Projector | User Manual - Page 21
    Connecting an HDMI source device The projector provides a HDMI input jack that allows you to connect it to an HDMI source device like a DVD player, a DTV tuner or a display. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV
  • BenQ MX511 DLP Projector | User Manual - Page 22
    which method you can use to connect to the device. To connect the projector to a Component Video source device: 1. Take a Component Video to VGA -in speaker will be muted when the AUDIO OUT jack is connected. • The projector is only capable of playing mixed mono audio, even if a stereo audio input
  • BenQ MX511 DLP Projector | User Manual - Page 23
    which method you can use to connect to the device. To connect the projector to an S-Video/Video source device: 1. Take an S-Video/Video cable built-in speaker will be muted when the AUDIO OUT jack is connected. • The projector is only capable of playing mixed mono audio, even if a stereo audio input
  • BenQ MX511 DLP Projector | User Manual - Page 24
    , it will run the cooling fan for approximately 90 seconds before energizing the lamp. 4. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 5. If you are prompted for a password, press the arrow keys to enter a six digit password. See
  • BenQ MX511 DLP Projector | User Manual - Page 25
    air comes from. Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press Auto on the projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values of Frequency and Clock to provide the best
  • BenQ MX511 DLP Projector | User Manual - Page 26
    image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the
  • BenQ MX511 DLP Projector | User Manual - Page 27
    turn the OSD menu on. and press / to select a preferred language. 2. Use / to highlight the SYSTEM SETUP: Basic menu. 4. Press Menu/Exit twice* on the projector or remote control to leave and save the settings. *The first press leads you back to the main menu and the second press closes the
  • BenQ MX511 DLP Projector | User Manual - Page 28
    if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Open the OSD menu and go to
  • BenQ MX511 DLP Projector | User Manual - Page 29
    projector or remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service . Write your selected password down here in this manual in advance or right after the password is entered
  • BenQ MX511 DLP Projector | User Manual - Page 30
    page with 'Off' shown in the row of Power on lock. You will not have to enter the password next time you turn on the projector. • If the password is incorrect, the password error message displays lasting for three seconds, and the message 'INPUT PASSWORD' displays for your retry. You can
  • BenQ MX511 DLP Projector | User Manual - Page 31
    SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press Source on the projector or remote control. A source selection bar displays. 2. Press / until your
  • BenQ MX511 DLP Projector | User Manual - Page 32
    , press Mode/Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 6. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 7. To reduce size of the picture, press Mode/Enter to switch back to the zoom in/out
  • BenQ MX511 DLP Projector | User Manual - Page 33
    and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want
  • BenQ MX511 DLP Projector | User Manual - Page 34
    . To select an operation mode that suits your need, you can follow one of the following steps. • Press Mode/Enter on the remote control or projector repeatedly until your desired mode is selected. • Go to the PICTURE > Picture Mode menu and press / to select a desired mode. The picture modes are
  • BenQ MX511 DLP Projector | User Manual - Page 35
    vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. On is
  • BenQ MX511 DLP Projector | User Manual - Page 36
    preference. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments. To adjust the
  • BenQ MX511 DLP Projector | User Manual - Page 37
    made all of the desired adjustments. 9. Press Menu/Exit to exit and save the settings. Creating your own startup screen In addition to selecting the projector preset startup screen from among BenQ logo, Black or Blue screen, you can make your own startup screen that is an image projected from your
  • BenQ MX511 DLP Projector | User Manual - Page 38
    Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic >
  • BenQ MX511 DLP Projector | User Manual - Page 39
    displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the on-screen instruction. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connecting a computer" on page 19
  • BenQ MX511 DLP Projector | User Manual - Page 40
    the function, press any key (except the Page Up/Down key) on the projector or remote control. Even if an image is frozen on the screen, the Installation or FAQ-Features and Service based on the information you want to know. 3. Press Mode/Enter. 4. Press / to select a problem and press Mode/Enter
  • BenQ MX511 DLP Projector | User Manual - Page 41
    is between 0°C-35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. To activate the High Altitude Mode: 1. Press Menu/Exit and then press
  • BenQ MX511 DLP Projector | User Manual - Page 42
    flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. • To protect the lamp, the projector will not respond to any commands during the cooling process. • To shorten the cooling time, you can also activate the Quick
  • BenQ MX511 DLP Projector | User Manual - Page 43
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Wall Color Off/Light Yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Keystone Position 1. DISPLAY Phase H.
  • BenQ MX511 DLP Projector | User Manual - Page 44
    /Last 1 min/Last 2 min/ Last 3 min/Never Top-Left/Bottom-Left/TopRight/Bottom-Right Count Down/Count Up Language 4. SYSTEM SETUP: Basic Projector Position Menu display time Menu Settings Menu position Reminder message Direct power on Operation Settings Auto Power Off Blank Timer Sleep Timer
  • BenQ MX511 DLP Projector | User Manual - Page 45
    On/Off Reset All Settings FAQ-Image and Installation FAQ-Features and Service 6. INFORMATI ON Current System Status • Source • Picture Mode • items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected,
  • BenQ MX511 DLP Projector | User Manual - Page 46
    Description of each menu • The default values listed in this manual, especially on pages 46-54, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION (default setting/ value) Wall Color Aspect Ratio Keystone Position Phase (depends
  • BenQ MX511 DLP Projector | User Manual - Page 47
    present the 3D images. When 3D Sync function is enabled, the projector will enter a special picture mode and the current picture mode adjustment discover the inversion of the image depth, enable this function to correct the problem. This function is only enabled when the input signal is PC@120Hz,
  • BenQ MX511 DLP Projector | User Manual - Page 48
    (default setting/ value) DESCRIPTION (default setting/value) Picture Mode Reference Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 34 for details. Selects a picture mode that best
  • BenQ MX511 DLP Projector | User Manual - Page 49
    2. PICTURE menu FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Adjusts white peaking while maintaining correct color presentation. Brilliant Color See "Adjusting Brilliant Color" on page 35 for details. This function is only available when User 1/2 is selected. Color See
  • BenQ MX511 DLP Projector | User Manual - Page 50
    Sets the timer counting direction. Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 27 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 14 for details. Menu display time
  • BenQ MX511 DLP Projector | User Manual - Page 51
    Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Sets which IR remote sensor of the projector will receive the signal from the remote control. Allows you to select which background color will display when no signal is input into the
  • BenQ MX511 DLP Projector | User Manual - Page 52
    with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust
  • BenQ MX511 DLP Projector | User Manual - Page 53
    closed captioned (usually marked as "CC" in TV listings). Caption Version Selects a preferred closed captioning mode. Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 and MONITOR OUT jacks are correctly connected to devices. See
  • BenQ MX511 DLP Projector | User Manual - Page 54
    6. INFORMATION menu FUNCTION (default setting/ value) DESCRIPTION (default setting/value) FAQ-Image and Installation FAQFeatures and Service Displays possible solutions to problems you may encounter. Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE
  • BenQ MX511 DLP Projector | User Manual - Page 55
    wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range
  • BenQ MX511 DLP Projector | User Manual - Page 56
    To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp mode menu and press / . Setting Auto Power Off This function allows the projector to turn off automatically if no input source is detected after a set period of time to prevent unnecessary waste of lamp life. To set Auto
  • BenQ MX511 DLP Projector | User Manual - Page 57
    lamp. The warning messages below are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic selected ("Setting Lamp mode as Economic" on page 56
  • BenQ MX511 DLP Projector | User Manual - Page 58
    the lamp • Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury or damage
  • BenQ MX511 DLP Projector | User Manual - Page 59
    lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 6. Insert
  • BenQ MX511 DLP Projector | User Manual - Page 60
    that secures the lamp cover. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 12. After the startup logo, open the On-Screen Display
  • BenQ MX511 DLP Projector | User Manual - Page 61
    TEMP LAMP Power events Orange Off Green Flashing Off Green Off Orange Flashing Off Off Stand-by mode Off Powering up Off Normal operation 1. The projector needs 90 seconds to cool down as it was abnormally shut down without the normal cooling down process. Or Off 2. The
  • BenQ MX511 DLP Projector | User Manual - Page 62
    Troubleshooting The projector does not turn on. Cause There is no power from the power cable. Attempting to turn the projector on again during the cooling process. No picture Cause The video source is not turned on or connected correctly. The projector is not correctly connected to the input signal
  • BenQ MX511 DLP Projector | User Manual - Page 63
    Specifications All specifications are subject to change without notice. Optical Resolution (MX511) 1024 x 768 XGA (MS510) 800 x 600 SVGA Display system 1-CHIP DMD Lens F/Number F = 2.51 to 2.69, f = 21.95 to 24.18 mm Lamp 185 W lamp
  • BenQ MX511 DLP Projector | User Manual - Page 64
    Dimensions 264 mm (W) x 108.8 mm (H) x 211.4 mm (D) 211.4 108.8 Ceiling mount installation 42 264 72 72.8 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 104.7 80 75 203 100.00 69.41 Unit: mm 84.00 82.50 116.00 102.24 71.93 132 264 64 Specifications 108.2 102.7
  • BenQ MX511 DLP Projector | User Manual - Page 65
    Timing chart Supported timing for PC input Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 400 640 x 480 800 x 600 1024 x 768 1024 x 576 1024 x 600 1024 x 600
  • BenQ MX511 DLP Projector | User Manual - Page 66
    Supported timing for HDMI input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400 x 1050 1600 x 1200
  • BenQ MX511 DLP Projector | User Manual - Page 67
    Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p( 50.00 60.00 50.00 Displaying a 1080i@60Hz or 1080i@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal
  • BenQ MX511 DLP Projector | User Manual - Page 68
    ). To obtain warranty service, immediately notify the in accordance with BenQ's written instructions, especially the ambient humidity must feet, and avoiding to operate the projector in a dusty environment. This , chemical, manual or otherwise, revision or changes. *DLP, Digital Micromirror Device
  • BenQ MX511 DLP Projector | User Manual - Page 69
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and
  • BenQ MX511 DLP Projector | User Manual - Page 70
    support government in making accessible technology choices BenQ's LCD monitors and projectors . • All BenQ monitors and projectors come with user manuals on compact discs which could be be available upon requests. • BenQ's customer service provides answers and assistance to all our customers
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Welcome
MS510/MX511
Digital Projector
User Manual