BenQ PW9500 DLP Projector User Manual - Page 20
Making Connections, Preparations
View all BenQ PW9500 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Making Connections Preparations When connecting a signal source to the projector, be sure to: 1. Turn off all equipment before making any connections. 2. Use only the correct type cables for each source with proper type plugs. 3. Ensure that all cable plugs are firmly fitted to the equipment jacks. Note that all cables shown in the following connection diagrams may not be supplied with the projector (See "Shipping contents" on page 7 Shipping contents). Most cables are commercially available from electronics stores. 20
20
English
Making Connections
Preparations
When connecting a signal source to the projector, be sure to:
1.
Turn off all equipment before making any connections.
2.
Use only the correct type cables for each source with proper type plugs.
3.
Ensure that all cable plugs are firmly fitted to the equipment jacks.
Note that all cables shown in the following connection diagrams may not be supplied with the
projector (See "Shipping contents" on
page 7 Shipping contents). Most cables are commercially
available from electronics stores.