BenQ SW240 User Manual - Page 14
Connect the audio cable., Connect USB devices., To Connect the USB Type-B Cable
View all BenQ SW240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
To Connect the HDMI Cable Or Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. To Connect the DP Cable Or Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. After the monitor and the computer are powered on, if the image is not displayed, disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System and DisplayPort on the OSD menu of the monitor and change the setting from 1.2 to 1.1. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the OSD menu, see Basic menu operation on page 35. The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. 3. Connect the audio cable. You may connect headphones to the headphone jack found on the back side of the monitor. 4. Connect USB devices. To Connect the USB Type-B Cable Connect the USB cable between the PC and the monitor (via the upstream USB port at the back). This upstream USB port transmits data between the PC and the USB devices connected to the monitor. TV OUT SDIF-OUT PDIF-OUT 14 How to assemble your monitor hardware