BenQ W5000 User Manual
BenQ W5000 - DLP Projector - HD 1080p Manual
 |
UPC - 840046018689
View all BenQ W5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ W5000 manual content summary:
- BenQ W5000 | User Manual - Page 1
W20000-en.book Page 1 Monday, October 22, 2007 3:35 PM W20000/W5000 Digital Projector Home Cinema Series User Manual Welcome - BenQ W5000 | User Manual - Page 2
information 41 Care of the projector 41 Cleaning and replacing the dust filter 41 Lamp information 43 Getting to know the lamp hour 43 Extending lamp life 43 Timing of replacing the lamp 44 Replacing the lamp 44 Indicators 47 Troubleshooting 48 Specifications 49 Warranty and Copyright - BenQ W5000 | User Manual - Page 3
to provide you with an enjoyable home theater viewing experience. For the best results, please read this manual through carefully as it is your guide through the control menus and operation. Important safety instructions Your projector is designed and tested to meet the latest standards for - BenQ W5000 | User Manual - Page 4
. If the projector does become wet, 12. This projector is capable of displaying disconnect it from the power point and call inverted images for ceiling mount installation. BenQ to have the projector repaired. Use only BenQ's Ceiling Mounting Kit for mounting. 4 Important safety instructions - BenQ W5000 | User Manual - Page 5
with live parts. The only user serviceable parts are the lamp, and air filter Ceiling mounting the projector which have their own removable covers or . You can purchase a BenQ projector ceiling mount kit from the place you purchased your BenQ projector. BenQ recommends that you also purchase - BenQ W5000 | User Manual - Page 6
W20000 (CHINA) (EU) (UK) (US) (3-2 power adaptor) W20000 W5000 Projector Power cable Component Video cable Remote control Batteries User manual • Dispose of used batteries according to the battery manufacturer's instructions and local environment regulations for your region. • If the - BenQ W5000 | User Manual - Page 7
TV (HDTV) 720p, 1080i and 1080p formats, with the 1080p format providing a true 1:1 image reproduction. • High picture quality The projector provides excellent picture quality due to its high resolution, excellent home theater brightness, super high contrast ratio, vivid color and rich gray-scale - BenQ W5000 | User Manual - Page 8
8 Monday, October 22, 2007 3:35 PM English Projector exterior view Front and upper side view W20000 Rear view 7 HDMI S-VIDEO Y PB/CB PR/CR details. 13. HDMI ports 13 14 15 16 14. Component Video inputs (RCA) support Y/PB/PR or Y/CB/CR video signal 15. Composite Video input (RCA) 16 - BenQ W5000 | User Manual - Page 9
a preset mode" on page 24 for details. Lights up or flashes when the projector lamp has 12. ENTER button developed a problem. See "Indicators" on page 47 Enacts the selected On-Screen Display (OSD) for details. menu item. 6. LENS SHIFT (up) 13. EXIT button LENS SHIFT (down) Goes back to - BenQ W5000 | User Manual - Page 10
on the screen in 5 relation to the orientation of the projector. (Up 6 , Down ) 7 Manually corrects distorted pictures resulting from an angled projection. (Left , Right ) 8 9 8. MENU button 10 Toggles the On-Screen Display (OSD) menu on and off. See "Using the menus" on page 20 - BenQ W5000 | User Manual - Page 11
English W20000-en.book Page 11 Monday, October 22, 2007 3:35 PM Positioning your projector Choosing a location Your projector is designed to be installed Screen Projector Position Auto Off Sleep Timer Background Color Menu Settings Input Source Auto Source Search S-Video English BenQ Floor - BenQ W5000 | User Manual - Page 12
to the projection distance. BenQ has provided separate tables of menu is not activated) on the remote control, or LENS SHIFT / on the projector to projector. Picture -- Advanced Black Level Clarity Control Color Temperature Color Temperature User_ Fine Gamma Selection Brilliant Color Color - BenQ W5000 | User Manual - Page 13
English W20000-en.book Page 13 Monday, October 22, 2007 3:35 PM How to determine the position of the projector for a given screen size 1. given distance This method can be used for situations where you have purchased this projector and would like to know what screen size will fit in your room. The - BenQ W5000 | User Manual - Page 14
English W20000-en.book Page 14 Monday, October 22, 2007 3:35 PM Projection dimensions Refer to "Dimensions" on page 49 for the center of lens dimensions of this projector before screen size is not in the table above, please contact your BenQ dealer for assistance. 14 Positioning your projector - BenQ W5000 | User Manual - Page 15
English W20000-en.book Page 15 Monday, October 22, 2007 3:35 PM Installation for a 4:3 ratio screen The illustrations and table recommended screen sizes are listed. If the your screen size is not in the table above, please contact your BenQ dealer for assistance. Positioning your projector 15 - BenQ W5000 | User Manual - Page 16
English W20000-en.book Page 16 Monday, October 22, 2007 3:35 PM Connecting with video equipment You can connect the projector to any type of video the projector to display. Best video quality The best available video connection method is HDMI. HDMI (High-Definition Multimedia Interface) supports - BenQ W5000 | User Manual - Page 17
W20000-en.book Page 17 Monday, October 22, 2007 3:35 PM Connecting HDMI devices You should use an HDMI cable when making connection between the projector cable Connecting component-video devices Be sure to match the corresponding colors between the cables and the terminals. AV equipment: DVD player, - BenQ W5000 | User Manual - Page 18
English W20000-en.book Page 18 Monday, October 22, 2007 3:35 PM Connecting /CR H V RS-232 12V TRIGGER VGA-BNC cable If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, please check that the video source device is turned - BenQ W5000 | User Manual - Page 19
more than one image source simultaneously" on page 32 for details. System Setup Language Splash Screen My Screen Projector Position Auto Off Sleep Timer Background Color Menu Settings Input Source Auto Source Search S-Video HDMI 1 HDMI 2 Video S-Video Component 1 Component 2 RGB HD English - BenQ W5000 | User Manual - Page 20
S-Video EXIT Back 2. Use / to highlight the System Setup menu. System Setup Language Splash Screen My Screen Projector Position Auto Off Sleep Timer Background Color Menu Settings Input Source Auto Source Search S-Video English BenQ Floor Front Disable Disable Blue On EXIT Back System Setup - BenQ W5000 | User Manual - Page 21
you used in this manual, and keep the manual in a safe place for later recall. Setting a password Once a password has been set and activated, the projector cannot be used unless the correct password is entered every time the projector is started. 1. Press MENU on the projector or remote control - BenQ W5000 | User Manual - Page 22
procedure 1. Press and hold PRESET MODE on the projector or PRESET on the remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be - BenQ W5000 | User Manual - Page 23
and the projector are not perpendicular to each other, the projected image becomes vertical trapezoidal. To correct this problem, see will need to manually correct the picture. • Using the remote control or projector i. Press one of the Arrow keys on the remote control ( , ) or projector ( / , - BenQ W5000 | User Manual - Page 24
W20000-en.book Page 24 Monday, October 22, 2007 3:35 PM Using the preset and user modes Selecting a preset mode The projector projector repeatedly until your desired mode is selected. • Using the OSD menu 1. Press MENU and then press / until the Picture -- Basic menu Color Tint Sharpness Reset - BenQ W5000 | User Manual - Page 25
W20000 the Picture Mode sub-menu item. Picture -- Basic Picture Mode Load Settings From Brightness Contrast Color Tint Sharpness Reset Picture Settings Rename User names easy to be identified or understood by the users of this projector. The new name can be up to 12 characters including English - BenQ W5000 | User Manual - Page 26
English W20000-en.book Page 26 Monday, October 22, 2007 3:35 PM Fine-tuning . -8 0 +8 Adjusting Color Highlight Color in the Picture -- Basic menu and adjust the values by pressing / on the projector or remote control. Lower setting produces less saturated colors; setting to the minimum - BenQ W5000 | User Manual - Page 27
Temperature and select a preferred setting by pressing / on the projector or remote control. There are several color temperature settings available. 1. Lamp Native: With the lamp's original color temperature and higher brightness. This setting is suitable for environments where high brightness is - BenQ W5000 | User Manual - Page 28
lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it. Proper color management can only be achieved under controlled - BenQ W5000 | User Manual - Page 29
with projectors which have a lower contrast ratio. You can adjust the contrast level to allow for ambient lighting levels within the room which may affect color detail. Make sure Dynamic Black in the Picture -- Advanced menu is set to "On" before you can adjust the contrast ratio. To manually - BenQ W5000 | User Manual - Page 30
W20000-en.book Page 30 Monday, October 22, 2007 3:35 PM English Selecting the aspect ratio The "aspect ratio" is the ratio of the image width to the image height. Digital TV is usually in 16:9 ratio, which is the default for this projector, and most analog TV signals and DVDs are in - BenQ W5000 | User Manual - Page 31
W20000 To activate High Altitude Mode: 1. Press MENU and then press / until the Advanced Setup menu is highlighted. 2. Press to highlight projector can operate under any and all harsh or extreme conditions. Advanced Setup Lamp Pattern Dust Filter High Altitude Mode On Password Key Lock Reset - BenQ W5000 | User Manual - Page 32
until the source is selected. • Using the OSD menu 1. Press MENU and then press / until the Display menu is highlighted. 2. Press to highlight PIP and press ENTER. The PIP page displays. 3. Highlight PIP and press / to select On. The projector will select two currently active signals to display and - BenQ W5000 | User Manual - Page 33
Advanced Setup menu is Advanced Setup highlighted. Lamp Pattern Dust Filter 2. Press to highlight Key Lock, and press ENTER. The control keys lock. High Altitude Mode Off Password To unlock the keys, press and hold EXIT on the projector or remote control for 5 Key Lock ENTER Reset All - BenQ W5000 | User Manual - Page 34
W20000-en.book Page 34 Monday, October 22, 2007 3:35 PM Turning the power off To turn the projector off, press POWER ( ) on the projector unplug the power cable from the power outlet. • To protect the lamp, the projector will not respond to any commands during the cooling process. Power Off - BenQ W5000 | User Manual - Page 35
selected. Main menu Sub-menu Picture Mode Load Settings From Brightness Contrast Picture -- Basic Color Tint Sharpness Reset Picture Settings Rename 0-100 0-100 0-100 -20-+20 0-8 0 IRE/7.5 IRE 0/1/2/3 0-10 0/1/2 0/1/2 Lamp Native/Warm/Normal/Cool/User 1/User 2/User 3 0-100 0-100 0-100 0-100 0-100 - BenQ W5000 | User Manual - Page 36
Projector Position System Setup Auto Off Sleep Timer Background Color Menu Settings Input Source Auto Source Search Lamp Advanced Setup Information Pattern Dust Filter High Altitude Mode Password Key Lock Reset All Settings ISF Source Picture Mode Resolution Lamp Hours Dust Filter Hours BenQ - BenQ W5000 | User Manual - Page 37
input source) Color (depends on the selected input source) Tint (depends on the selected input source) Sharpness (depends on the selected input source) Reset Picture Settings Rename User Mode DESCRIPTION Pre-defined picture modes are provided so you can optimize your projector picture set-up - BenQ W5000 | User Manual - Page 38
poor picture quality in the four edges. You can also manually press / to decide how much to be concealed. Setting menu FUNCTION (default setting / value) Language (English) Splash Screen (BenQ logo) My Screen Projector Position (Floor Front) Auto Off (Disable) Sleep Timer (Disable) Background Color - BenQ W5000 | User Manual - Page 39
menu FUNCTION (default setting / value) DESCRIPTION Lamp Lamp Power (Normal) Selects the projector lamp between Normal and Whisper modes. Lamp Hours Shows the lamp hours information. See "Getting to know the lamp hour" on page 43 for details. Pattern Dust Filter High Altitude Mode (Off) Reset - BenQ W5000 | User Manual - Page 40
quality from BenQ video display devices. Accordingly, we recommend that setup and calibration be performed by an ISF certified installation technician. For more information, please go to www.imagingscience.com or contact the place you purchased the projector. Information menu This menu shows you - BenQ W5000 | User Manual - Page 41
projector except the lamp or the air filter. Contact your dealer or local BenQ Customer Service Centre if the projector range for the projector. Please refer to the Spec. page in this manual or consult your > Dust Filter Hours menu or the Information > Dust Filter Hours menu to check how long the - BenQ W5000 | User Manual - Page 42
dust filter grill by pulling the tab outwards and away from the projector. Do not reset the filter timer if the filter has not been replaced. 1. After the startup logo, press MENU and then press / until the Advanced Setup menu is highlighted. 2. Press to highlight Dust Filter and press ENTER. The - BenQ W5000 | User Manual - Page 43
System Setup Language Splash Screen My Screen Projector Position Auto Off Sleep Timer Background Color Menu Settings Input Source Auto Source Search S-Video Whisper mode, go into the Advanced Setup > Lamp > Lamp Power menu and press / . English BenQ Floor Front Disable Disable Blue On EXIT Back - BenQ W5000 | User Manual - Page 44
ENTER to dismiss the message. WARNING NOTICE: Replace lamp now Lamp > 3000hrs Lamp-usage time exceeded Replace lamp (refer to User Manual) then reset lamp timer OK Replacing the lamp To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing - BenQ W5000 | User Manual - Page 45
English W20000-en.book Page 45 Monday, October 22, 2007 3:35 PM 1. Turn the power off and disconnect the projector 5. Slowly pull the lamp out of the projector. from the wall socket. Turn off all connected equipment and disconnect all other cables. See "Turning the power off " on page 34 for - BenQ W5000 | User Manual - Page 46
W20000-en.book Page 46 Monday, October 22, 2007 3:35 PM Resetting the lamp timer Do not reset the lamp timer if the lamp has not been replaced as this could cause damage. 1. After the startup logo, press MENU and then press / until the Advanced Setup menu is highlighted. Advanced Setup Lamp - BenQ W5000 | User Manual - Page 47
. Please contact your local BenQ customer center for purchasing a new lamp. The fans are not working. Fan sensors error Fans do not rotate during powering up. Thermal condition error The projector has shutdown automatically. If you try to restart the projector, it will shutdown again. Please - BenQ W5000 | User Manual - Page 48
English W20000-en.book Page 48 Monday, October 22, 2007 3:35 PM Troubleshooting Problem Cause Remedy There is no power from the power cable. The projector does not The power switch is not in the on turn on. position. Plug the power cable into the AC inlet on the rear of the projector, and - BenQ W5000 | User Manual - Page 49
are subject to change without notice. Optical Projection system DMD chip Lens Projection screen size Lamp Electrical Compatibility Color Space Terminals Input Output Control General characteristics Projector weight Power Power consumption Operating temperature Operating humidity Operating altitude - BenQ W5000 | User Manual - Page 50
English W20000-en.book Page 50 Monday, October 22, 2007 3:35 PM Timing chart Supported timing for RGBHV input (Analog or Digital PC signals) Format 720 x 400 640 x 480 800 x 600 848 x 480 1024 x 768 1152 x 864 1280 x 768 1280 x - BenQ W5000 | User Manual - Page 51
English W20000-en.book Page 51 Monday, October 22, 2007 3:35 PM Supported timing for HDMI input Format 480/60i 480/60p .25/72 74.175/74.25 74.175/74.25 74.25 74.175/74.25 148.5 148.35/148.5 Supported timing for Video and S-Video inputs Format NTSC 3.58 NTSC 4.43 PAL-B/G PAL M PAL N PAL 60 SECAM - BenQ W5000 | User Manual - Page 52
fails to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in-between 10% and 90%, temperature inbetween 0°C and 35°C, altitude lower than 3000 meters, and avoiding to operate the projector in a dusty environment. This warranty gives you - BenQ W5000 | User Manual - Page 53
W20000-en.book Page 53 Monday, October 22, 2007 3:35 PM Regulation statements FCC statement (for United States users) This equipment has been tested and used in accordance with the instructions, may cause harmful interference to or your household waste disposal service. The recycling of materials will
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
W20000/W5000 Digital Projector
Home Cinema Series
User Manual
Welcome
W20000-en.book
Page 1
Monday, October 22, 2007
3:35 PM