Beretta STAMPEDE DELUXE Beretta Stampede User Manual

Beretta STAMPEDE DELUXE Manual

Get Beretta STAMPEDE DELUXE PDF manuals and user guides View all Beretta STAMPEDE DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals

Beretta STAMPEDE DELUXE manual content summary:

  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 1
    Instruction Manual
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 2
    half-cocked • Trigger released • Transfer bar disengaged Fig. 8 • Hammer fully cocked • Trigger released • Transfer bar disengaged Fig. 9 • Trigger pulled from a cocked hammer • Transfer bar engaged • Revolver fires 2
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 3
    safety procedures must be carefully followed. ! WARNING: Before loading or shooting your new revolver, it is absolutely necessary that you become thoroughly familiar with the safety and operating instructions outlined in this manual. If you are unsure of any feature, function, or the proper care of
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 4
    RING 15 LOAD CHECK 16 OBSTRUCTION CHECK 19 BEFORE LOADING 21 GETTING A FEEL OF YOUR REVOLVER'S ACTION 23 AMMUNITION 25 LOADING 26 UNLOADING 28 UN-COCKING A LOADED REVOLVER 29 SIGHTING 31 FIRING 31 MAINTENANCE AND CLEANING 34 DISASSEMBLY 37 REASSEMBLY 39 STORAGE 39 4
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 5
    BASIC SAFETY RULES ! WARNING: PLEASE READ THIS MANUAL BEFORE HANDLING YOUR FIREARM. ! WARNING: FIREARMS CAN BE DANGEROUS AND CAN POTENTIALLY CAUSE SERIOUS INJURY, DAMAGE TO PROPERTY OR DEATH, IF HANDLED IMPROPERLY. THE FOLLOWING
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 6
    Removing or unloading the magazine will not guarantee that a firearm is unloaded or cannot fire. Shotguns and rifles can be checked by cycling or removing all rounds and by then opening and inspecting the chamber so that a visual inspection of the chamber for any remaining rounds can be made. 3.
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 7
    . Store and carry your firearm so that dirt or lint does not accumulate in the working parts. Clean and oil your firearm, following the instructions provided in this manual, after each use to prevent corrosion, damage to the barrel or accumulation of impurities which can prevent use of the gun in an
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 8
    of hearing damage from shooting. 9. NEVER CLIMB A TREE, FENCE OR OBSTRUCTION WITH A LOADED FIREARM. Open and empty the chamber(s) of your firearm and engage the manual safety before climbing or descending a tree or before climbing a fence or jumping over a ditch or other 8
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 9
    obstruction. Never pull or push a loaded firearm toward yourself or another person. Always unload a firearm, visually and physically check to see that the magazine, loading mechanism and chamber are unloaded, and action is open before handing it to another person. Never take a firearm from another
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 10
    It is YOUR responsibility to know and abide by Federal, State and ! Local laws governing the sale, transportation and use of firearms in your area. Especially for U.S. consumers: For information about Firearm Safety Courses in your area, please visit the National Rifle
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 11
    NOMENCLATURE A Grip B Hammer C Barrel D Front Sight E Rear Sight F Cylinder Frame G Trigger H Trigger Guard I Loading Port L Loading Gate M Cylinder N Base Pin O Unloaded-cylinder indicator ring (firing pin protector) P Base Pin Latch Q Ejector Rod Handle R Transfer Bar S Muzzle BL M F C D I A
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 12
    S Q N P Fig. 3 Fig. 4 N M O R Fig. 5 12
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 13
    Stampede single-action cartridge revolver. Your Beretta Stampede single-action firearm is an accurate, fully-functioning and faithful replica of an original American firearm produced approximately 130 years ago. It has been designed and constructed to provide years of trouble-free use. Beretta
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 14
    SPECIFICATIONS Caliber .45LC .44-40 .357 Mag. Capacity 6 rounds Barrel Length (in) 43/4 51/2 71/2 (mm) 121 140 190 Overall Length (in) (mm) Weight Unloaded (lbs approx.) (gr approx.) 10.3 261 2.30 1,050 11 280 2.35 1,070 13 330 2.45 1,110 14
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 15
    Always point the revolver in a safe direction. Keep your finger away from the trigger. Your Beretta Stampede single-action revolver comes fully assembled please refer to the "Disassembly" and "Reassembly" sections of this manual. NOTICE: It is advisable to carry out the disassembly and the assembly
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 16
    At various points in this manual you will be instructed to "visually and physically check to be certain your revolver is unloaded." This should become . To visually and physically check to be certain your Beretta Stampede single-action revolver is unloaded, carefully follow the steps below. 1. With
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 17
    loaded chamber is aligned with the loading gate and remove the cartridge. If necessary, locate the ejector rod handle on the left side of the revolver, forward of the frame and below the barrel (Fig. 3-Q). Move it rearward to eject the cartridge, being careful to eject the cartridge or fired case
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 18
    the hammer rearward and gently pull the trigger to return the hammer to the fully lowered position. ! WARNING: FAILING TO MANUALLY CONTROL THE HAMMER AT THIS STAGE COULD CAUSE THE REVOLVER TO FIRE IF A CARTRIDGE IS IN THE CYLINDER. 12. Ease the hammer forward with the thumb while pulling the trigger
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 19
    no obstructions in the chambers and bore, follow the disassembly steps below: ! WARNING: Keep the firearm pointed in a SAFE direction. ! WARNING: Visually and manually check to be sure the firearm is unloaded using the procedure above. ! WARNING: Always keep fingers and thumbs clear of the front of
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 20
    ). 12. If an obstruction in any of the six (6) chambers or the bore is detected, a qualified gunsmith must remove the obstruction and inspect the revolver before it can be fired. ! WARNING: If another cartridge is fired into an obstructed chamber or bore, a catastrophic failure can result. 13. If no
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 21
    . WARNING: Even though the firearm is unloaded, be certain it is pointed in a SAFE direction. CAUTION: Do not "dry fire" your Beretta Stampede single-action revolver without using snap-caps or the yellow firing-pin protector. (Fig. 4-O) Dry firing is defined as firing a firearm with no ammunition in
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 22
    "click" into the half-cock notch. This action disengages the bolt and allows the cylinder to rotate clockwise (as viewed from the rear), permitting the revolver to be loaded or unloaded through the loading gate. WARNING: The second, or half-cock, position of the hammer is NOT a safety. A blow to the
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 23
    in this procedure. Practice this procedure with an UNLOADED revolver until you are proficient: ! WARNING: Be certain the revolver is pointed in a SAFE direction, and that your other hand is away from the muzzle. ! WARNING: Visually and manually check to be certain the firearm is unloaded. 1. With
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 24
    THE HAMMER OR ! PULLING STRONGLY ON THE TRIGGER IN THE HALF-COCK POSITION COULD DAMAGE OR BREAK THE HALF-COCK NOTCH AND CAUSE THE REVOLVER TO FIRE. NORMAL TRIGGER PULL IS 5 LBS MAXIMUM. (Fig. 10) NOTICE: IF YOU SUSPECT THAT EXCESSIVE FORCE HAS BEEN APPLIED TO THE HAMMER OR TRIGGER
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 25
    with, or as the result of, the use in Beretta Stampede revolvers of faulty, or non-standard, or "remanufactured," or hand other dents or defects (this applies even to factory ammunition). Do not fire old ammunition in this firearm. Primers, powder, cartridge cases, and bullets can deteriorate with
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 26
    LOADING To load your Beretta Stampede single-action revolver, follow the steps below: ! WARNING: Be certain that the revolver is pointed in a loading. ! WARNING: Be sure that you have the correct cartridges for your revolver. ! WARNING: Be sure that the obstruction check has been completed prior to
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 27
    the lowered position. (Fig. 6) ! WARNING: FAILING TO MANUALLY CONTROL THE HAMMER AT THIS STAGE COULD CAUSE THE REVOLVER TO FIRE IF A CARTRIDGE IS IN THE CYLINDER. 8. unload the revolver, and seek qualified instruction from someone who is familiar with the safe loading of single-action revolvers. !
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 28
    To unload your Beretta Stampede single-action revolver, follow the steps below: ! WARNING: Be certain the revolver is pointed in gun, below the front of the barrel. (Fig. 3-N) ! WARNING: Be certain the revolver is pointed in a SAFE direction and your other hand is away from the muzzle. CAUTION
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 29
    6) ! WARNING: Always unload the firearm immediately after shooting is completed. UN-COCKING A LOADED REVOLVER To un-cock your loaded Beretta Stampede single-action revolver, follow the steps below: ! WARNING: Be certain the revolver is pointed in a SAFE direction and your other hand is away from the
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 30
    -bar) and slowly and safely lower the hammer all the way to the lowered position. (Fig. 6) ! WARNING: FAILING TO MANUALLY CONTROL THE HAMMER AT THIS STAGE COULD CAUSE THE REVOLVER TO FIRE IF A CARTRIDGE IS IN THE CYLINDER ! WARNING: Always unload the firearm immediately after shooting is completed
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 31
    sight gun may require the assistance of a competent gunsmith. FIRING To fire your Beretta Stampede single-action revolver, follow the steps below: ! WARNING: Always wear high-quality eye and 4. If necessary, use your other hand for support, being sure to keep it rearward of the trigger. (Fig. 16) 31
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 32
    not to upset the alignment of the front and rear sights. The revolver will fire. 9. After the first shot is fired, repeat this process to fire additional cartridges, or proceed to the unloading instructions. WARNING: Always unload the firearm immediately after shooting is completed. WARNING: Never
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 33
    firearm by following the unloading instructions in this manual. 5. Carefully inspect your ammunition manually check to be sure there are no obstructions in the chambers and bore. If a chamber or bore obstruction is detected, a qualified gunsmith must remove the obstruction and inspect the revolver
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 34
    unload the firearm by following the unloading instructions in this manual. 4. Using the disassembly instructions in the maintenance and cleaning section below cleaning of your Beretta Stampede singleaction revolver, follow the steps below: WARNING: Always be certain the revolver is unloaded before
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 35
    a SAFE direction, locate the ejector rod handle on the left side of the gun, below the front of the barrel. (Fig. 3-A) WARNING: Be certain the revolver is pointed in a SAFE direction and your other hand is away from the muzzle. 5. While keeping the gun pointed in a SAFE direction, move the ejector
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 36
    gunsmith who is familiar with these firearms should conduct further disassembly. ! WARNING: Do not attempt to alter the internal parts of your revolver's action or firing mechanism. Alterations to the hammer, trigger, springs, sear or other internal parts can result in a very dangerous situation
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 37
    firearm pointed in a SAFE direction. ! WARNING: Visually and manually check to be sure the firearm is unloaded. 1. Locate the the loading gate side. (Fig. 14) CAUTION: The cylinder is manufactured to fit your revolver precisely. Do not force the cylinder from the frame. NOTICE: AT THIS STAGE YOU CAN
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 38
    lead bullets deposit metal fouling in the chamber throats, forcing cone of the barrel, and in the bore. If "leading" is noted in your revolver, clean it out before it builds up and interferes with reliable functioning and accuracy. A special "lead removing" cleaning tool (for bore and chambers) is
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 39
    UNTIL YOU HEAR A "CLICK". FAILING TO DO SO WILL CAUSE THE TRANSFER-BAR TO BECOME STUCK UNDER THE FIRING PIN AND JAM YOUR REVOLVER. (Fig. 17) STORAGE ! WARNING: Firearms should be stored UNLOADED, with the hammer fully lowered. (Fig. 6) ! WARNING: Store firearms and ammunition separately, each in
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 40
    NOTE 40
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 41
    Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 OK NO 41
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 42
  • Beretta STAMPEDE DELUXE | Beretta Stampede User Manual - Page 43
    Fabbrica d'Armi Pietro Beretta S.p.A. Via Pietro Beretta, 18 25063 GARDONE VAL TROMPIA (Brescia) Italia Tel. (030) 8341.1 www.beretta.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Instruction Manual