Bernina Artista 640E User Guide - Page 94

94 Setup-Program Sewing Settings 2 Opening Setup Program • press the Setup button • selection menu appears • touch «2» • the screen «Sewing Settings» appears Embroidery Settings 3 Motor Speed • turning stitch width knob or touching «+» or «-» changes the maximum speed. It increases or reduces the speed by 8-10 stitches • the number in the bar reflects the stitches per minute, the basic settings are indicated by a dark bar Thread Tension Correction • turning stitch length knob or touching «+» or «-» changes the basic setting (0) of the upper Thread Tension by plus or minus 20% 0 = basic settings (factory settings) 1 = + 10% 2 = + 20% -1 = - 10% -2 = - 20% • this correction fine tunes the basic tension setting on your sewing computer, which may be affected by variables such as thread weight, etc. • the number in the bar and the blue background of the «+» or «-» reflect the changes • the «Reset» on-screen button returns you to the basic settings • the tension alteration affects all stitches and remains saved when the sewing computer is turned off («0») Opening Setup Program • press the Setup button • selection menu appears • touch «3» • the screen for adjusting the embroidery hoop appears To Next Page • touch «To Next Page» • the next screen appears To Previous Page • touch «To Previous Page» • the previous screen appears Saving and Closing • touch «OK» • changes are saved, the screen closes and the selection menu appears Closing Screen • touch «ESC» • the screen display closes, the original settings remain saved and the selection menu appears