Binatone G430 User Manual - Page 7

QUICK START GUIDE Charging the Battery Before using your PND for the first time, we recommend you charge the unit for 5 hours via the DC adaptor, or until the charge light turns green. Plug the USB cable or DC adaptor, or the car charger into the USB socket The charging indicator on the front of the unit will light up red. When the unit is fully charged the red light will turn green. When you use the PND in you car, we recommend that you always use the car charger in order to maintain the battery level. If you have a MicroSD memory Card, you may install it refer to the picture (below) Switch the unit off first before installing or removing the MicroSD card. When installing it can only be fitted one way - the contacts should be facing away from you and the cut-off corner at the top (as shown above). Slide the card in and push it in so that it clicks into place. Once the card is installed it does not need to be removed. If you need to remove the card, push the card in and it will eject from the slot. Car Adapter When using your PND in the car we recommend that you always use the in-car charger to power the unit, especially on long journeys. Plug the in-car charger into the USB socket of the unit. Plug the other end of the adapter into the car's cigarette-lighter / 12V DC socket. The adaptor is also compatible with 24V DC sources, as found in many heavy goods vehicles. 6 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)