Biostar G41U3G Bios Setup - Page 16
USB Dev ice Wakeup from S3/S4, High Performance Event Timer, HPET Memory Address, EUP Control
View all Biostar G41U3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
G41U3G BIOS Manual USB Dev ice Wakeup from S3/S4 T his item allows you to enable or disabled the USB resume from S3/S4 function. Options: Disabled (Default) / Enabled High Performance Event Timer T his item allows you to enable or disabled the HPET. Options: Disabled (Default) / Enabled HPET Memory Address T his item allows you to set the memory address of HPET . Options: FED00000h (Default) / FED01000h / FED02000h / FED03000h EUP Control (Optional) W hen EUP is enabled, the system will meet EUP requirement. Options: Disabled (Default) / Enabled Resume On Ring T his item allows you to control the wake on ring function. Options: Disabled (Default) / Enabled Resume On PME# When you select Enabled, a PME signal from PCI card returns the system to Full ON state. For this function to work, you may need a LAN add-on card which supports the Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to enable if applicabl e. Options: Disabled (Default) / Enabled Resume On RTC Alarm When " Enabled", you can set the date and time at which the RT C (real-time clock) alarm awak ens the system from Suspend mode. Options: Disabled (Default) / Enabled 15