Biostar G41U3G Setup Manual - Page 4
Motherboard Features - intel g41 motherboard
View all Biostar G41U3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC LGA 775 Supports Hyper-Threading / Execute Disable Bit / Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / Intel Architecture-64 / CPU Pentium Dual-Core / Celeron Dual-Core / Extended Memory 64 Technology / Virtualization Celeron 4xx processor Technology (Maximum Watt: 95W) FSB Support 800 / 1066 / 1333 MHz Chipset Intel G41 Intel ICH7 ITE 8721 Environment Control initiatives, Provides the most commonly used legacy Hardware Monitor Controller Super I/O Super I/O functionality. Fan Speed Controller Low Pin Count Interface ITE's "Smart Guardian" function Main DIMM Slots x 2 Each DIMM supports 256MB / 512MB / Dual Channel Mode DDR3 memory module Supports DDR3 800/1066/1333(OC) Memory 1GB / 2GB / 4GB DDR3 Max Memory Capacity 8GB Registered DIMM and ECC DIMM is not supported (CPU with FSB 800 MHz only supports DDR3 800) Graphics GMA X4500 Max Shared Video Memory is 1984MB (Depending on OS and memory size) IDE Integrated IDE Controller Ultra DMA 33 / 66 / 100 Bus Master Mode supports PIO Mode 0~4 SATA 2 Integrated Serial ATA Controller Data transfer rates up to 3.0 Gb/s. SATA Version 2.0 specification compliant LAN Realtek RTL 8111DL 10 / 100 Mb/s / 1Gb/s auto negotiation Sound Codec ALC662 USB3.0 Asmedia ASM1042 Slots PCI slot PCI Express x 16 slot On Board Floppy Connector Connectors Printer Port Connector Serial Port Connector IDE Connector 5.1 channels audio out High Definition Audio Data transfer rates is limited to 250 MB/s due to spec of PCIE1.0 x1 x2 Supports PCI expansion cards x1 Supports PCI-E x16 expansion cards x1 Each connector supports 2 Floppy drives x1 Each connector supports 1 Printer port x1 Connects to RS-232 Port x1 Each connector supports 2 IDE device 2