Biostar H61MLB Bios Setup - Page 15

H61MGC/H61MLC UEFI BIOS Manual Restore AC Power Loss This setting specifies how your system should behave after a power fail or interrupts occurs. Power Off: Leaving the system in power-off status after power recovers. Power ON: Powering on the system immediately when power returns. Last State: 1. Leaving the system in power-off if the system shuts down at DC off status; 2. Powering on the system immediately if the system shuts down at DC on status. Options: Power Off (Default) / Power On / Last State Serial Port 1 Configuration Advanced BIOS SETUP UTILITY Serial Port 1 Configuration Serial Port Device Settings Change Settings [Enabled] [Auto] Enable or Disable Serial Port (COM) Enter +/F1 F3 F4 ESC Select Screen Select Item Select Change Opt. General Help Optimized Defaults Save & Reset Exit Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc. Serial Port This item enables or disables Serial Port (COM). Options: Enabled (Default) / Disabled Change Settings This item allows you to select an optimal setting for Super IO device. Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 / IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 / IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 / IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 14