Biostar IDEQ 220K BIOS MANUAL - Page 16
Apic Mode, Mps Version Control For Os, Os Select For Dram > 64mb, Small Logo Epa Show, Summary - specifications
View all Biostar IDEQ 220K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
K8VBK-S7 BIOS Setup 3.11 APIC MODE Selecting Enabled enables ACPI device mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled. 3.12 MPS VERSION CONTROL FOR OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. 3.13 OS SELECT FOR DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. 3.14 Delay for HDD 3.15 SMALL LOGO (EPA) SHOW This item allows you to select whether the "Small Logo" shows. Enabled (default) "Small Logo" shows when system boots up. Disabled No "Small Logo" shows when system boots up. 3.16 SUMMARY SCREEN SHOW This item allows you to enable/disable the summary screen. Summary screen means system configuration and PCI device listing. The choices: Enabled, Disabled (default). 15