Biostar K8M800MAM2 K8M800 MICRO AM2 bios guide - Page 16
APIC Mode, MPS Version Control For OS, OS Select For DRAM > 64MB, Delay for HDD Secs, Small LOGO
View all Biostar K8M800MAM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
K8M800 Micro AM2 BIOS Setup APIC Mode Selecting Enabled enables APIC mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled MPS Version Control For OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Delay for HDD (Secs) This item allows you to select the timing of Delay for HDD The Choices: 0 (default). Min= 0 Max= 15 Key in a DEC number. Small LOGO (EPA) Show This item allows you to select whether the "Small Logo" shows. Enabled (default) "Small Logo" shows when system boots up. Disabled No "Small Logo" shows when system boots Summary Screen Show This item allows you to enable/disable the summary screen. system configuration and PCI device listing. The Choices: Disabled (default), Enabled. Summary screen means 15