Biostar K8NHA PRO K8NHA Pro user's manual - Page 13

BIOSTAR Motherboard (2) System Fan Headers: JSFAN1/JSFAN2 (optional) Pin Assignment 1 Ground 2 +12V 3 FAN RPM Sense 1 3. Installing DDR Module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. 2. Insert the DIMM firmly and vertically into the slot until the retaining chip snap back in place and the Dimm is properly seated. 6. Wireless LAN Card Installation (optional) 1. Align the wireless LAN on the slot such a way that wireless LAN card matches in the slot. Be sure to face the wireless LAN card with its components towards the inner part of the motherboard. 2. Insert the wireless LAN card vertically and firmly into the slot till the wireless card is properly seated. 3. Screw the brackets. 4. Insert the wireless LAN antenna by turning it clockwise. 13 English