Biostar M6VCT M6VCT compatibility test report - Page 61
Vcore Waveform Measurement-ver1.0
View all Biostar M6VCT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
VCORE WAVEFORM MEASUREMENT-Ver1.0 Finished Date: 90/08/17 CPU_1.70v setup 1. Select the RUN Button -changes to read "STOP" when operating. 2. Adjust the Toggle Frequency to the desired setting. 3. Adjust the Duty Cycle to the desired setting. 4. Adjust the Slew Rate to the desired setting. 5. Adjust the Icc Maximum Slider Bar while noting the Icc Max(A) Reading to obtain the desired Maximum Icc Load setting. 61
61
VCORE WAVEFORM MEASUREMENT-Ver1.0
Finished Date: 90/08/17
CPU_1.70v setup
1. Select the RUN Button –changes to read “STOP” when operating.
2. Adjust the Toggle Frequency to the desired setting.
3. Adjust the Duty Cycle to the desired setting.
4. Adjust the Slew Rate to the desired setting.
5. Adjust the Icc Maximum Slider Bar while noting the Icc Max(A) Reading to obtain the
desired Maximum Icc Load setting.