Biostar M7VIQ M7VIQ BIOS setup guide

Biostar M7VIQ Manual

Get Biostar M7VIQ PDF manuals and user guides View all Biostar M7VIQ manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar M7VIQ manual content summary:

  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 1
    M7VIQ BIOS Setup BIOS Setup 1 1 Main Menu 3 2 Standard CMOS Features 6 3 Advanced BIOS Features 9 4 Advanced Chipset Features 12 5 Integrated Peripherals 16 6 Power Management Setup 21 7 PnP/PCI Configurations 25 8 PC Health Status 28 9 Frequency Control 30 i
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 2
    of the chipset controlling the entire system. The rest of this manual is intended to guide you through the process of configuring your system using Setup. Plug and Play Support These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD (Extended System Configuration Data) write is
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 3
    M7VIQ BIOS Setup PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR (Double Data Rate Synchronous DRAM) are supported. Supported CPUs This AWARD BIOS supports the AMD Socket CPU. Using Setup In
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 4
    M7VIQ BIOS Setup 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on !! WARNING !! The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS installed on board, for update information. ! Figure 1. Main
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 5
    M7VIQ BIOS Setup Advanced Chipset Features This submenu allows you to configure special chipset the voltage and clock may cause CPU or M/B damage!) Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly with the boot sequence. These
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 6
    M7VIQ BIOS Setup Set User Password If the Supervisor Password is not set, then the User Password will function in the Without Saving Abandon all changes made during the current session and exit setup. message will be displayed before proceeding. confirmation Upgrade BIOS This submenu allows you to
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 7
    M7VIQ BIOS Setup 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 8
    M7VIQ BIOS Setup Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options 2M, 5.25 in 720K, 3.5 in Select the type of floppy disk drive installed in your system. 1.44M, 3.5 in 2.88M, 3.5 in None Video EGA/VGA CGA 40 Select the default
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 9
    M7VIQ BIOS Setup Item Halt On Base Memory Extended Memory Total Memory Options All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key N/A N/A N/A Description Select the situation in which you want the BIOS to stop the POST process and notify you. Displays the amount of
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 10
    write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Disabled (default BIOS attempt to load the operating system from the device in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 11
    M7VIQ BIOS Setup tracks. Disabling this option reduces the time it takes to boot-up. The Choices: Disabled (default), Enabled. CPU Internal Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. The Choices: Enabled (default) Enable cache.
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 12
    version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Video BIOS Shadow Determines whether video BIOS
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 13
    M7VIQ BIOS Setup 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 14
    M7VIQ BIOS Setup DRAM Timing This item determines DRAM clock/ timing follow SPD or not. The Choices: By SPD (default), Manual. DRAM CAS Latency When DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The Choices: 2.5 (default), 2. Bank Interleave
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 15
    M7VIQ BIOS Setup The Choices: Auto (default), Manual. AGP Driving Value While AGP driving control item set to "Manual", it allows user to set AGP driving. The Choices: DA (default). AGP Fast Write The Choices: Enabled, Disabled (default). AGP Master 1 WS Write When Enabled,
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 16
    " option allows caching of the system BIOS ROM at F0000h-FFFFFh, which can improve system performance. However, any programs writing to this area of memory will cause conflicts and result in system errors. The Choices: Enabled, Disabled (default). Video RAM Cacheable Enabling this option allows
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 17
    M7VIQ BIOS Setup 5 Integrated Peripherals ! Figure 5. Integrated Peripherals OnChip IDE Control The chipset contains a PCI IDE interface with support for two IDE channels. Select "Enabled" to activate the first and / or second IDE interface. If you install a primary and / or secondary add-in IDE
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 18
    in your system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/100, select Auto to enable BIOS support. The Choices: Auto (default), Disabled. IDE HDD Block Mode
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 19
    M7VIQ BIOS Setup Super IO Device If you highlight the literal "Press Enter" next to the "Super IO Device" label and then press the enter key, it
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 20
    M7VIQ BIOS Setup Onboard Parallel Port This item allows you to determine access onboard Midi Port can use. The Choices: 10 (default), 5. Init Display First With systems that have multiple video cards, this option determines whether the primary display uses a PCI Slot or an AGP Slot. The Choices:
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 21
    M7VIQ BIOS Setup USB Keyboard Support Enables support for USB attached keyboards. The Choices: Disabled (default), Enabled. 20
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 22
    M7VIQ BIOS Setup 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. !
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 23
    M7VIQ BIOS Setup There are four options of Power Management, three of which have fixed mode settings Min. Power Saving Minimum power management. Suspend Mode = 1 hr. HDD Power Down = 15 min Max. Power Saving Maximum power management only available for sl CPU's. Suspend Mode = 1 min. HDD Power Down =
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 24
    M7VIQ BIOS Setup DPMS Initial display power management signaling. Modem Use IRQ This determines without any subsequent manual intervention. There are 3 sources that provide current to the CMOS area that retains these Power-On instructions; the motherboard battery (3V Enabled. Wake Up on LAN/Ring 23
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 25
    M7VIQ BIOS Setup An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 26
    M7VIQ BIOS Setup 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 27
    M7VIQ BIOS Setup are reserved in the system BIOS. If the Disabled (default) option is chosen, the system's ESCD will update only when the new configuration varies from the last one. If the Enabled option is chosen, the system is forced to update Controlled By" is set to "Manual". IRQ-3 IRQ-4 IRQ-5
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 28
    M7VIQ BIOS Setup graphic controller is on an ISA bus, the Write Access to the palette will not show up on the ISA bus if the PCI
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 29
    M7VIQ BIOS Setup 8 PC Health Status ! Figure 8. PC Health Status Current CPU Temperature This field displays the current temperature of the CPU. Current CPUFAN Speed This field displays the current speed of CPU fan. Current SYSFAN Speed This field displays the current speed SYSTEM fan. CPU Vcore/AGP
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 30
    M7VIQ BIOS Setup Chassis Open Warning The Choices: Disabled (defautl), Enabled. Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. This item only effective under Windows 98 ACPI mode. The Choices: Disabled (default), 60OC/140OF, 65OC/149OF, 70OC/158OF, 75OC/167OF. 29
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 31
    M7VIQ BIOS Setup 9 Frequency Control ! Figure 9. Frequency Control Auto Detect DIMM/ PCI Clk The Choices: +/-0.25% (default), Disabled, -0.5%, +/-0.5%, +/-0.75%. CPU Host/ PCI Clock This item allows you to select CPU Clock, and CPU over clocking. If unfortunately, the system's frequency that you are
  • Biostar M7VIQ | M7VIQ BIOS setup guide - Page 32
    M7VIQ BIOS Setup ※ It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage. 31
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
M7VIQ BIOS Setup
i
BIOS Setup
.......................................................................................
1
1 Main Menu
...................................................................................................
3
2 Standard CMOS Features
.............................................................................
6
3 Advanced BIOS Features
.............................................................................
9
4 Advanced Chipset Features
........................................................................
12
5 Integrated Peripherals
.................................................................................
16
6 Power Management Setup
..........................................................................
21
7 PnP/PCI Configurations
..............................................................................
25
8 PC Health Status
.........................................................................................
28
9 Frequency Control
......................................................................................
30