Biostar M7VIT M7VIT compatibility test report - Page 51
At the next menu , type B to Enable Stop Clock Throttling
View all Biostar M7VIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CPU CH 1 Condition Vcore Ripple Test(Open up the DOS Editor) Athlon_xp_2700+ M\B VIT3.0 STPCLK pin waveform CH 2 Vcore waveform 1.Boot the system to the Win98SE environment(Command Prompt Only) Dos mode and run the stpclk.bat 2.At the main menu ,type "U" to go to the "Utilities Submenu" 3.At the next menu , type "B" to "Enable Stop Clock Throttling" 1.At this menu , type "7" to enable Stop Clock Throttling at the rang of 50.0%~65.0% 2.Press tiwce and then "Y" to exit the stpclk.bat program. 3.Type "EDIT" to enter the "EDIT" pragram. Press "Alt+F" to open up a Pop-up menu. 7.Measure the Vcore waveform Vcore Transient waveform RESULT PASS 51
51
Vcore Ripple Test(Open up the DOS Editor)
CPU
Athlon_xp_2700+
M\B
VIT3.0
CH 1
STPCLK pin waveform
CH 2
Vcore waveform
Condition
1.Boot the system to the Win98SE environment(Command Prompt Only)
Dos mode and run the stpclk.bat
2.At the main menu ,type “U” to go to the “Utilities Submenu”
3.At the next menu , type “B” to “Enable Stop Clock Throttling”
1.At this menu , type “7” to enable Stop Clock Throttling at the rang of
50.0%~65.0%
2.Press <ESC> tiwce and then “Y” to exit the stpclk.bat program.
3.Type “EDIT” to enter the “EDIT” pragram. Press “Alt+F” to open up a
Pop-up menu.
7.Measure the Vcore waveform
Vcore Transient waveform
RESULT
PASS