Biostar P4M900-M4 Setup Manual - Page 22
Biostar P4M900-M4 Manual
View all Biostar P4M900-M4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Motherboard Manual 4.4 1. TROUBLESHOOTING Probable Solution No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard drive is spinning. module snaps into place. System does not boot from hard disk 1. Check cable running from disk to drive, can be booted from optical drive. disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. System only boots from optical drive. 1. Back up data and applications Hard disk can be read and applications files. can be used but booting from hard disk 2. Reformat the hard drive. is impossible. Re-install applications and data using backup disks. Screen message says "Invalid Review system's equipment. Make sure Configuration" or "CMOS Failure." correct information is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard drive. correctly. 2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives. 22