Biostar P4M900-M4 Bios Setup - Page 39
DRAM Clock, DRAM Timing, SDRAM CAS Latency, Bank Interleave, Precharge to Active tRP, Active
View all Biostar P4M900-M4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
P4M900-M4 DRAM Clock This item determines DRAM clock. The Choices: By SPD (default), 100MHz, 133MHz, 166MHz, 200MHz, 266MHz, 333MHz . DRAM Timing This item determines DRAM clock/ timing. The Choices: Auto by SPD (default), Manual, Turbo, Ultra. SDRAM CAS Latency When DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The Choices: 2.5 /4(default). Bank Interleave This item allows you to enable or disable the bank interleave feature. The Choices: Disabled (default). Precharge to Active (tRP) This item allows you to specify the delay from precharge command to activate command. The Choices: 4T (default). Active to Precharge (tRAS) This item allows you to specify the minimum row active time (tRAS). The Choices: 07T (default). Active to CMD (tRCD) Use this item to specify the delay from the activation of a bank to the time that a read or write command is accepted. The Choices: 4T (default). REF to ACT/REF to REF (Trfc) This item allows you to determine the selection for REF to ACT/REF to REF (tRFC). The Choices: 20T/21T (default). 38