Biostar P4TSP-D2 P4TSP-D2 user's manual - Page 8
DDR DIMM Modules: DDRA1/ DDRA2, Installing DDR Module
View all Biostar P4TSP-D2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CPU Fan Header: JCFAN1 3 Pin 1 1 2 JCFAN1 3 Assignment Ground +12V FAN RPM rate Sense System Fan Header: JSFAN1 Pin 1 3 1 JSFAN1 2 3 Assignment Ground +12V FAN RPM rate Sense DDR DIMM Modules: DDRA1/ DDRA2 DRAM Access Time: 2.5V Unbuffered/ no registered (without ECC) DDR SDRAM PC2100/ PC2700/ PC3200 Type required. DRAM Type: 128MB/ 256MB/ 512MB/ 1GB DIMM Module. (184 pin) DIMM Socket Location DDRA1 DDRA2 DDR Module 64MB/128MB/256MB/512MB/1GB *1 64MB/128MB/256MB/512MB/1GB *1 ***Only for reference*** Total Memory Size (MB) Max is 2GB Installing DDR Module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. 6