Biostar TA790GX XE Setup Manual - Page 31
B. Memory Integration Test M.I.T. - overclock
View all Biostar TA790GX XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TA790GX XE/TA790GX M2+/TA790GXB M2+ Notices: Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under "Overclocking Navigator Engine" item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is "Disabled"; the condition parameter should be changed to "Enable" to proceed this test. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series Exit T-Series Settings WARNING: Setting wrong values in below sections may cause system to malfunction. OverClock Navigator [Normal] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System CPU Frequency [200] > CPU FID/VID Control > Voltage Configuration > DRAM Timing Configuration > Hyper Transport Configuration > Memory Configuration > EC Configuration GFX Engine Clock Override [Disabled] Integrated Memory Test [Disabled] Options Enabled Disabled Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Main vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. ↓ Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series Exit T-Series Settings WARNING: Setting wrong values in below sections may cause system to malfunction. OverClock Navigator [Normal] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System CPU Frequency [200] > CPU FID/VID Control > Voltage Configuration > DRAM Timing Configuration > Hyper Transport Configuration > Memory Configuration > EC Configuration GFX Engine Clock Override [Disabled] Integrated Memory Test [Enabled] Options Enabled Disabled Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. Step 2 Save and Exit from CMOS setup and reboot the system to activate this test. Run this test for 5 minutes (minimum) to ensure the memory stability. Step 3 When the process is done, change the setting back from "Enable" to "Disable" to complete the test. 29