Biostar TA990FXE Setup Manual - Page 4

Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM3+ AMD 64 Architecture enables 32 and 64 bit CPU AMD Sempron / Phenom II / Athlon II / FX computing processors Supports Hyper Transport 3.0 Support HyperTransport 3.0 FSB Supports up to 5.2 GT/s Bandwidth Chipset AMD 990FX AMD SB950 ITE 8728 Environment Control initiatives Provides the most commonly used legacy Super I/O Super I/O functionality H/W Monitor Fan Speed Controller Low Pin Count Interface ITE's "Smart Guardian" function Main DDR3 DIMM Slots x 4 Max Memory Capacity 32GB Dual Channel Mode DDR3 memory module Supports DDR3 800/1066/1333/1600/1866 Memory Each DIMM supports 512MB/ 1GB/2GB/4GB/8GB DDR3 Supports DDR3 2000 (OC) Registered DIMM and ECC DIMM is not supported Data transfer rates up to 6 Gb/s. SATA III Integrated Serial ATA Controller SATA Version 3.0 specification compliant. RAID 0,1,5,10 support LAN AR8151 10 / 100 Mb/s / 1Gb/s auto negotiation Half / Full duplex capability Sound ALC892 7.1channels audio out Supports HD Audio USB3.0 Asmedia ASM1042 Data transfer rates up to 600 MB/s IEEE 1394 VIA VT6315N PCI Slot Slots PCI Express Gen2 x1 Slot PCI Express Gen2 x16 Slot On Board SATA Connector Front Panel Connector Connectors Front Audio Connector S/PDIF out Connector 1394a x2 Supports PCI expansion cards x1 Supports PCI-E Gen2 x1 expansion card x3 Supports PCI-E Gen2 x16,x16, x4, expansion cards x5 Each connector supports 1 SATA device x1 Supports front panel facilities x1 Supports front panel audio function x1 Supports digital audio out function Consumer IR Connector CPU Fan Header System Fan Header CMOS clear Header x1 Supports infrared function x1 CPU Fan power supply (with Smart Fan function) x2 System Fan Power supply x1 Restore CMOS data to factory default USB2.0 Connector x2 Each connector supports 2 front panel USB2.0 ports 2