Biostar TP43D2-A7 Manual - Page 16
Resume On PME, Resume On RTC Alarm, RTC Alarm Date Days, RTC Alarm Time, Active State Power- - ram
View all Biostar TP43D2-A7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
TP45D2-A7/TP43D2-A7 BIOS Manual Resume On PME# When you select Enabled, a PME signal from PCI card returns the system to Full ON state. For this function to work, you may need a LAN add-on card which supports the Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to enable i f applicable. Options: Disabled (Default) / Enabled Resume On RTC Alarm When " Enabled", you can set the date and time at which the RT C (real-time clock) alarm awak ens the system from Suspend mode. Options: Disabled (Default) / Enabled RTC Alarm Date (Days) You can choose which date the system will boot up. RTC Alarm Time You can choose the system boot up time, input hour, minute and second to specify. Note: If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work. Active State Power-Management T his item sets the ASPM configuration for the PCI Express devices b efore the operating system boots. T his function is for OS which does not support ASPM. Options: Disabled (Default) / Enabled Suspend mode T he item allows you to select the suspend type under the ACPI operating system. Options: S1 (POS) (Default) Power on Suspend S3 (ST R) Suspend to RAM Auto POS+STR 15