Bissell Lift-Off® Floors & More PET 53Y81 User Guide - Page 9

Maintenance and care Disposal of batteries continued 4. Separate left and right cover. 5. Remove the entire battery assembly from the cover. 6. Remove (3) Phillips head screws between the motor and battery bracket. 7. Pull the motor, PCB, fuse, and inner wire through the middle of the battery bracket, separating the battery bracket and single battery from the motor, PCB, and inner wire. 8. Cut wires from the PCB and fuse to the battery bracket. 9. Keep Battery Pack together - DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or visit www.rbrc.com. 10. Discard remainder of product CAUTION: Disconnecting the battery will destroy the appliance and void the warranty. Troubleshooting Vacuum won't turn on Possible causes Remedies 1. Battery isn't fully charged Brush roll not turning Possible causes 1. Charge battery. Follow charging battery instructions on page 5 Remedies 1. Brush roll is jammed 1. Remove obstruction. Follow instructions on pages 7 and 8 2. Brush roll needs to be reset 2. Follow instructions on page 8 3. Broken brush roll belt Vacuum cleaner has low suction Possible causes 3. Follow instructions on page 8 Remedies 1. Dirt container is full 1. Empty dirt container. Follow instructions on page 6 2. Dirt container is not installed properly 2. Position container correctly and snap firmly into place 3. Foot is loose 3. Make sure foot is fully inserted into body of unit 4. Filters need cleaning 4. Follow filter instructions on page 7 5. Filters need replacing 5. Visit www.bissell.com or call 1-800-237-7691 to order replacement filters. 9 w w w. b i s s e l l . c o m 800.237.7691