Bissell Little Green Pro Portable Carpet Cleaner 2505 User Guide 1 - Page 6

Assembly Before you clean 1. Remove loose dirt and impediments before deep cleaning. 2. Pretreating (optional): WARNING Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures. 2a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways. 2b. BISSELL Stain Pretreat Spray any BISSELL Stain Pretreat formula onto heavy traffic areas, soiled areas or stains. NOTICE Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area may aggravate this condition. Allow to penetrate for at least 3 minutes. Clean as normal, following the instructions below. Preparing the machine 1. Release Flex Hose by twisting the Hose Secure Latch clockwise. Unwrap Flex Hose completely. 2. Attach the Large Stain Tool or Tough Stain Tool to the Hose Grip until it snaps together. Make certain the tool is securely attached. 3. Twist the Quick Release™ Cord Wrap clockwise to unwrap the power cord completely and plug into grounded outlet. Filling the formula & water tank 1. Remove tank from the back of the machine by lifting up Tank Carry Handle. Note: This tank was designed with a flat bottom so it can be easily filled. 2. Unscrew the black cap and remove bottle insert. 3. Fill tank with hot tap water (140° F/60° C MAX) to the water fill line. Add 60 mL/2 oz of BISSELL 2X formula to the tank. 4. Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the machine. Tip Make only one trip to the sink by bringing the entire portable cleaner. Fill and empty in the same trip. 1. 2. 6 www.BISSELL.com