Bissell Momentum Vacuum User Guide - English - Page 14
Maintaining TurboBrush
 |
View all Bissell Momentum Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Maintenance and care Maintaining TurboBrush The TurboBrush should be checked regularly for clogs or debris wrapping around the brush. 2. 1. Unplug the vacuum from electrical outlet. 2. If a clog is present or debris is visible, unscrew the two screws on the back of the TurboBrush to remove the faceplate and clear any obstructions. 3. To clean debris from the brush, remove the 4. brush from the drive belt and clean debris. 4. Reposition the drive belt on the brush. Place ends of brush in slots on sides as shown. Reposition faceplate and secure with two screws. 14 w w w . b i s s e l l . c o m 800.237.7691
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
 |
 |
14
www.bissell.com
800.237.7691
M
aintenance and care
Maintaining TurboBrush
The TurboBrush should be checked regularly for
clogs or debris wrapping around the brush.
1.
Unplug the vacuum from electrical outlet.
2.
If a clog is present or debris is visible, unscrew
the two screws on the back of the TurboBrush to
remove the faceplate and clear any obstructions.
3.
To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4.
Reposition the drive belt on the brush.
Place ends of brush in slots on sides as
shown. Reposition faceplate and secure with
two screws.
2.
4.