Bissell OptiClean® Cyclonic Bagless Canister Vacuum User's Guide - Page 5
Warning
View all Bissell OptiClean® Cyclonic Bagless Canister Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Assembling your vacuum 1. Connect swivel hose by squeezing both locking buttons and inserting it into the suction opening on the canister. Once the swivel hose is inserted in the suction opening, release the locking buttons. 2. Connect telescoping extension wand to the handle end of the flex hose. Twist slightly to tighten. 3. Connect floor nozzle to the end of the telescoping extension wand. Twist slightly to tighten. 1. 4. Once assembled, you can store your vacuum in one of two positions: A. Storing in the in-use position: 1.To store with the floor nozzle attached, insert the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum. 2.To store without the floor nozzle attached, insert the storage clip (located on the bottom of the telescoping extension wand) into the storage slot on the rear of the vacuum. B. Storing in the upright position: 1.To store with the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the A1. back of the floor nozzle) into the storage slot on the bottom of the vacuum. 2.To store without the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the bottom of the telescoping extension wand) into the storage slot on the bottom of the vacuum. B1. Warning: Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children. 2. 3. Storing in the in-use position A2. Storing in the upright position B2. www.bissell.com 800.237.7691 156