Bissell Pet Hair Eraser® Cordless Hand Vacuum 94V5 User Guide - Page 8

Maintenance and care Disposal of batteries WARNING: This product contains Nickel Metal Hydride (Ni-MH) rechargeable batteries. According to Federal and State TM regulations, removal and proper disposal of Ni-MH batteries is required. For removal of the batteries in your Pet Hair Eraser see instructions below. If your Pet Hair Eraser Hand Vac is to be disposed of, the batteries should be removed and disposed of properly. 1. IMPORTANT: Remove from charging base and fully discharge hand vacuum. 2. Remove dirt container from handle. 3. Remove (6) Phillips head screws on the handle and cover. 4. Separate left and right cover. 5. Remove the entire battery assembly from the cover. 6. Remove (3) Phillips head screws between the motor and battery bracket. 7. Pull the motor, PCB, fuse, and inner wire through the middle of the battery bracket, separating the battery bracket and both batteries from the motor, PCB, and inner wire. 8. Cut wires from the PCB and fuse to the battery bracket. 9. Keep Battery Pack together - DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or visit www.rbrc.com. 10. Discard remainder of product CAUTION: Disconnecting the battery will destroy the appliance and void the warranty. 3. 6 screws 8 w w w. b i s s e l l . c o m 800.237.7691