Bissell Pet Hair Eraser Upright Vacuum 1650A User Guide - English - Page 8
Assembly, Operations
View all Bissell Pet Hair Eraser Upright Vacuum 1650A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Assembly: Tool Caddy Options 1 2 Your vacuum came with a Single Tool Caddy attached, to store 1 tool. To store 2 tools; pull back hard on single caddy to release from base and switch to the Double Tool Caddy (included separately). Operations Push hard to slide Double Tool Caddy on base of vacuum. You can now store 2 tools! WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures. NOTE: Be sure the green suction knob on side of vacuum is turned to "Floor Suction" before use. 1 2 Power On/O Switch Brush Roll On/O Switch Step gently on base and pull back on handle to recline. 3 Turn Height Adjustment Knob to desired carpet cleaning level. Turn vacuum on by pressing Power Switch on (I - ON and O - OFF). Press Brush roll switch to run the PowerBrush for carpet cleaning ( - Brush roll ON and O - Brush roll OFF). See page 14 to maintain the brush roll. NOTE: The brush roll will automatically shut off when vacuum is locked in upright position, recline to reactivate. NOTE: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your vacuum is difficult to push, adjust to the next higher setting. NOTE: In the unlikely event that hair wrapped around your brush roll, run vacuum back and forth on clean carpet several times. This will help release any wrapped hair. NOTE: Turn off the brush roll when vacuuming hard or delicate surfaces that may be caught by the rotating brush. This could include hard wood, tiled floors, small area rugs or frieze carpets that have long delicate fibers or threads. 8 www.BISSELL.com