Bissell PowerGlide Lift-Off Pet Plus Upright Vacuum 2043 User Guide - Page 8

Cleaning Inner Cyclone 1 With dirt container off vacuum base, push the empty tank button and twist counter-clockwise to remove the separator and pull down. 2 Tap separator against inside of trash bin and rinse with warm water if necessary. Be sure to let it completely dry before placing back in the dirt container. 3 Place separator back in, being sure to align each tab on either side of the top of separator with the notches inside the top of the dirt container. Cleaning Filters WARNING Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt Container in place. Allow components to dry before reassembling the Dirt Container. 1 2 With vacuum unplugged, remove the tank and lift up on the tab attached to the filter cover. There are 2 filters here; one foam filter on top and a thinner fiber filter; both are washable. 3 Remove post-motor filter located on the 4 front of the vacuum underneath the filter cover. If it appears dirty, remove the filter Replace the postmotor filter by pushing it straight back, clicking each side. and gently tap the filter on the edge of a waste basket. NOTE: The post-motor filter is a pleated filter. This filter is not washable and must be replaced when it becomes dirty. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. 8 www.BISSELL.com