Bissell Powergroom Pet Canister Vacuum Powergroom Pet Canister User's Guide - Page 15

Troubleshooting Vacuum cleaner won't run Possible causes 1. Vacuum cleaner is not plugged in 2. Power button is not pressed down WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Check electrical plug 2. Press power button down Vacuum cleaner won't pick up or low suction Possible causes Remedies 1. Tools, flex hose and/or telescoping extension wand are blocked 1. Remove each part and check for blockages 2. Filters are dirty 2. Check and clean or replace pre-motor and post-motor filters 3. Dust bag is full 3. Replace with new dust bag 4. Swivel hose not securely 4. Make sure swivel hose is locked into attached to suction opening suction opening 5. Crack or hole in flex hose 5. Check hose and replace if needed 6. Air flow regulator or variable suction power 6. Change to closed or maximum setting control is set to open or minimum setting Visible dust escaping from vacuum Possible causes Remedies 1. Dust bag is full 1. Replace with new dust bag 2. Filters missing or installed incorrectly 2. Check pre-motor and post-motor filter for correct installation 3. Filters are dirty 3. Check and clean or replace pre-motor and post-motor filters 4. Flex hose is blocked 4. Remove hose and check for blockages 5. Swivel hose not securely 5. Make sure swivel hose is locked into attached to suction opening suction opening 6. Crack or hole in flex hose 6. Check hose and replace if needed www.bissell.com 15 800.237.7691