Bissell Powergroom Pet Vacuum User Guide - English - Page 16
roubleshooting, aintenance and care
View all Bissell Powergroom Pet Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Maintenance and care Cleaning the upper tank 1. 1. Grasp the inner cyclone and twist to the left until the locking tabs stop the rotation. Pull down from the upper tank to remove it. 2. Wipe out the inside of the upper tank and the inner cyclone with a damp cloth moistened with water or a mild cleaning solution. 3. If you desire to thoroughly clean the filtration disk located in the upper portion of the inner 3. cyclone, hold the bottom of the cyclone and turn filtration disk to the right and pull up to remove. 4. The inner cyclone and filtration disk may be washed using a mild detergent. Be sure it is completely dry before reassembling or damage to your unit may result. 5. Once cleaning is completed, reassemble the filtration disk over the inner cyclone by 5. sliding it straight down on the top of the inner cyclone and turning left. Be sure to line up the tabs when reassembling for proper installation. 6. To replace the inner cyclone, slide it into the upper housing. Be sure to line up the inner cyclone by ensuring tabs on filtration disk are positioned toward the front of the unit. Push the inner cyclone in and rotate it to the 6. right until the locking tabs stop the rotation. Troubleshooting Vacuum cleaner won't run Possible causes 1. Power cord not plugged in 2. Blown fuse/tripped breaker in home 16 w w w . b i s s e l l . c o m WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Check electrical plug 2. Check/replace fuse or reset breaker 800.237.7691