Bissell ProHeat 2X Lift-Off Upright Carpet Cleaner 1565 User Guide - Page 7
Fill Formula & Water Tank
View all Bissell ProHeat 2X Lift-Off Upright Carpet Cleaner 1565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Fill Formula & Water Tank: EasyFill 1 Dirty Water Tank 2 Formula & Water Tank Locate the Formula & Water Tank on the back side of the Pod 3 4 Pull handle up and lift Formula & Water Tank 5 Set tank on flat surface. The tank should rest on the red cap and the plastic edge of the tank. Remove the yellow cap and fill with hot tap water to water line, then replace the cap. Insert bottle to color-coded opening. Press down and squeeze to add formula to the EasyFill line. Place the tank back on the unit. TIP: Attaching the Pod • When the portable machine is seated correctly, the heated cleaning light will illuminate when you turn the machine on. • If the heat indicator light does not illuminate, release the pod and re-secure by pushing firmly until both sides snap into place. NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT HEAT WATER OR TANK IN MICROWAVE, OR USE BOILING WATER. NOTE: For Easy-Fill Anti-Bacterial cleaning benefits, do not add additional cleaning formulas. ATTENTION Do not over wet carpet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure. www.BISSELL.com 7