Bissell ProHeat 2X Revolution Pet Upright Carpet Cleaner 1548 User Guide - Page 12
Cleaning with Hose and Tool, Cleaning Area Rugs
View all Bissell ProHeat 2X Revolution Pet Upright Carpet Cleaner 1548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Cleaning Area Rugs Important! Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. Not for use on silk or delicate area rugs. Regularly clean your high-traffic area rugs in Express Clean mode to remove the forgotten dirt. 1 Select Express Clean Mode. 2 Test in a small inconspicuous area first for colorfastness. 3 Important: Keep the foot of the deep cleaner perpendicular to the rug's edge with each cleaning pass to prevent damage. Cleaning with Hose and Tool *Ensure the machine is upright while using the hose and tool. (The rotating brush rolls under the foot will lift off the ground.) 1 2 Lift the accessory hose door on top of foot on the front of the machine. The door flips toward the machine to open. 3 Insert the hose and snap into place. Be sure the colored hose release clip is facing out, away from machine. 4 Attach the tool to the end of the hose. (Tools may vary by model.) Press the power button to turn machine on. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. Release the trigger to suck up the dirty solution. Work in small sections until the area is clean. When finished cleaning, turn the machine on to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing. NOTE: If using the Mini Deep Reach Tool, be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers. 12 www.BISSELL.com