Bissell VAC&shine Vac & Shine User's Guide - Page 7

Operations Wet Mop 2. 1. By squeezing the trigger, you will turn off the vacuum suction. 2. Water and Solution will flow to the 2 spray tips on the Wet Mop side. Gently mop the floor with the Gentle Clean® MicroFiber pad. Depressing the trigger will dispense water and solution based on your cleaning job. Sticky, dirty areas may require more water and solution. Floor will need to air dry for 3-5 minutes. Spray Tips Tip: You do not have to empty the Dirty Tank before wet mopping. Cleaning the Gentle Clean® MicroFiber Pad 1. After Wet Mopping, remove the MicroFiber Pad to launder or wash. 1. To wash, simply toss in the wash, air dry and reuse. No need to buy disposable cloths every time you use your Vac&Shine! Maintenance and care Storing and Charging your Vac&Shine Your Vac&Shine can be stored Ready-to-Use, by leaving water and formula in the Clean Tank. 1. 1. To charge while storing, place the charger plug into the charging port on the side of the unit. Make sure it is securely connected and the charger indicator light is illuminated. Charger Plug w w w. b i s s e l l . c o m 7 800.237.7691