Bosch B36IT71SNS Installation Instructions - Page 16
Pushing the appliance into the installation cavity
UPC - 825225867333
View all Bosch B36IT71SNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
9. Pushing the appliance into the installation cavity m CAUTION m Caution when pushing the appliance into the installation cavity. - Do not damage the water pipe or power cord attached to the floor. - Check finger guard on both sides when pushing the appliance into the cavity. Immediately after pushing the appliance into the cavity, check that it functions by opening and closing the doors. Carefully push the appliance into the cavity. Insert appliance straight! Push in the appliance until the frame is situated on the cavity walls. NOTE When the floor or the appliance is tilted in comparison to the installation cavity adjust height adjustable wheels before you move the appliance into the installation cavity. Put the mains plug into the socket. Prevent the power cord from becoming caught. Tie a piece of string to the middle of the power cord and feed forwards under the appliance. When pushing in the appliance, pull the cable forwards. or Using adhesive tape, stick the power cord to the floor centrally behind the appliance approx. 15" (380 mm) away from the rear panel of the cavity. Remove the edge protection. Remove transportation protection device from the underside of the freezer compartment drawer. Check function of the finger guard. Open and close both doors of the refrigerator compartment. The finger guard must slide smoothly in the gap between the appliance and cavity wall. 16