Bosch DVR-16L-100A Operation Manual

Bosch DVR-16L-100A Manual

Get Bosch DVR-16L-100A PDF manuals and user guides View all Bosch DVR-16L-100A manuals
Add to My Manuals
Save this manual to your list of manuals

Bosch DVR-16L-100A manual content summary:

  • Bosch DVR-16L-100A | Operation Manual - Page 1
    Divar MR Digital Video Recorder Type numbers DVR-8K, DVR-16K, DVR-8L, DVR-16L en Operation Manual_en
  • Bosch DVR-16L-100A | Operation Manual - Page 2
  • Bosch DVR-16L-100A | Operation Manual - Page 3
    contents 1 Safety 1.1 Important safety instructions 1.2 Safety precautions 1.3 Important Notices 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 5.2 Search 5.3 Functions available during playback Bosch Security Systems User Manual Table of contents | en 1 3
  • Bosch DVR-16L-100A | Operation Manual - Page 4
    DVR Control Center Program 6.5 Live Mode 6.6 Search mode 6.7 Remote Setup mode 6.8 Remote Export Settings 7 Additional programs 7.1 Alarm Notifier program 7.2 Main Screen of Alarm Notifier program 7.3 Archive Player program 7.4 Web Viewer program 8 REFERENCE 8.1 Troubleshooting
  • Bosch DVR-16L-100A | Operation Manual - Page 5
    an enclosure unless proper ventilation is provided, or the manufacturer's instructions have been adhered to. 4. Water - Do not use this disconnect the power from the cable to be installed into the unit. 12. Servicing - Do not attempt to service Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 6
    upon completion of service or repairs to the unit to ensure proper operating condition. 16. Installation - Install in accordance with the manufacturer's instructions and in accordance . Mount the unit per the manufacturer's instructions. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 7
    housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for proper grounding of the mount and supporting structure, grounding of the coax sensitive printed circuit boards. Fuse rating - For security Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 8
    disconnect for all units. Rack-mount - Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions Resolve Radio-TV Interference Problems. This booklet is user guide is the intellectual property of Bosch Security
  • Bosch DVR-16L-100A | Operation Manual - Page 9
    registered trademarks and must be treated accordingly. NOTICE! This operation manual has been compiled with great care and the information it contains has may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting
  • Bosch DVR-16L-100A | Operation Manual - Page 10
    8 en | Safety Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 11
    one DVR server simultaneously. • Network bandwidth throttle: - Automatically adjust a bandwidth according to network speed status of unit. • Remote alarm notification via PC software or e-mail. • Time and date sync from NTP server. • Daylight saving mode. Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 12
    control). Digital Video Recorder Note: Model DVR-16L (16 Channel) is used for the description, operation and details provided in this operation manual. 2.2 Accessories Remote Control AAA Type Batteries for Remote Control Rack Mount Bracket Mouse Divar MR PC software Screws for rack mount
  • Bosch DVR-16L-100A | Operation Manual - Page 13
    Recorder 2.3 Front panel DVR-16K / DVR-16L a b c Introduction | en 11 d ef g h DVR-8K / DVR-8L a b i the screen mode to full, 4, 6, 8, 9 or 16 screens. Set the video output signal to VGA mode. : see different multiscreen modes. : View all channels in sequence. : Displays the search
  • Bosch DVR-16L-100A | Operation Manual - Page 14
    DVR-8L and DVR-16L only) Insert a disc here. d Channel Buttons You can input a number with the channel buttons. You can also use the channel PTZ camera to the preset position. • (16) TOUR: Tours all registered preset positions channel button. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 15
    Digital Video Recorder 2.4 Back panel DVR-16K / DVR-16L a b Introduction | en 13 c de f g h i j k fl m n o DVR-8K / DVR-8L a b c de f g h relays via the supplied 25-pin D-type connector board. h RS-422/485 Terminals: Connect RS422/485 compatible cameras. i KBD IN: Connect a Bosch CCTV
  • Bosch DVR-16L-100A | Operation Manual - Page 16
    modes. • : View all channels in sequence. • ESC: Use to return to previous level or to exit menu system without saving. • MENU: Displays the setup menu. • Arrow Buttons (b B v V): Selects or moves between the menu options. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 17
    the mark point during the single channel playback of recorded data. • DVRs. Press the ID button, then press the number button within 2 seconds to select the system ID of the DVR. If you set the system ID to "0", you can control multiple DVR at the same time. Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 18
    16 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 19
    and other equipment. Please refer to the camera manual or the manuals for other devices as necessary for additional connection IN 11 12 GND 5 6 IN 13 14 GND 7 8 IN 15 16 h i jk lm n Figure 3.1 Basic connection overview Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 20
    (automatically terminated). b Connect the Monitor, DVR, VCR, or others to the video 16 (alarm) inputs or connect up to 8 alarm output relays via the supplied 25-pin D-type connector board. g Connect PTZ cameras or DVRs. h Connect a Bosch a PC to the unit for service purposes. Use a null-modem cable
  • Bosch DVR-16L-100A | Operation Manual - Page 21
    for the keyboard. For distances over 30m between keyboard and Divar MR, the Keyboard Extension Kit (LTC 8557) must be DVR can automatically obtain and configure the network interface via DHCP. Manually configure network The DVR may be manually Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 22
    TX- of the DVR to RX- of the PTZ unit and TX+ of the DVR to RX+ of the PTZ unit correctly. • Recommended initial data are 9600 Baud Rate, 8 Data bits, 1 Stop bit and No parity. • When connecting PTZ cameras to DVRs RS-485 settings of the camera and DVRs. Figure 3.2 RS-422/485 connections
  • Bosch DVR-16L-100A | Operation Manual - Page 23
    the BIPHASE port The Biphase port is used for connecting cameras that use Bosch Biphase communications to control camera positioning. Five Biphase outputs are provided for . 5 (minus) Biphase control ch. 5 (plus) System ground/cable shield. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 24
    GND 3 4 IN 11 12 GND 5 6 IN 13 14 GND 7 8 IN 15 16 Relay 1 1 1A Relay 2 14 2A Relay 3 3A Relay 7 7A Relay 8 8A GND Figure 3.4 Alarm I/O port connector Connecting the Inputs Each (alarm) input line input 9 Alarm input 10 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 25
    Alarm input 16 Relay 1 output pole 1 Relay 2 output pole 1 Relay 3 output pole 1 Relay 4 output pole 1 Relay 5 output pole 1 Relay 6 output pole 1 Relay 7 output pole 1 Relay 8 output . You can see the live screen and operate the system. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 26
    by the monitor setting. • This DVR is based on a VGA monitor using connector on the back of the DVR. 2. Turn on the VGA monitor. beep sounds to display the main screen. The DVR will restart and then the VGA monitor is MON A connector on the back of the DVR. 2. Turn on the CCTV monitor. 3. Press
  • Bosch DVR-16L-100A | Operation Manual - Page 27
    system will be rebooted automatically. 3.13 General explanation of the live screen on the main monitor Main monitor screen ab c d ef g Figure 3.8 Main monitor screen Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 28
    Digital Video Recorder a Channel Number: Displays the channel number. b Camera Name indicates input triggered recording. d Selected Channel: Displays the selected channel with yellow box. e System Control speed. • : Starts instant playback in selected channel. • : Stop playback. f Live Screen:
  • Bosch DVR-16L-100A | Operation Manual - Page 29
    view, 6-view, 8-view, 9-view or 16-view screens on the main monitor. 1. Press channels in sequence. 3. Select [OK (A)] and press ENTER to confirm your selection. Note: To display the screen you desire to watch in full screen mode, double click the desired channel. Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 30
    channel of the monitor B. b Channel buttons: Press a 1 to 16 channel button to see the current camera image on the monitor B. c Screen mode • Full Screen Mode: When you see the selected channel always the channel number ( DVR. 1. Select the PTZ camera channel
  • Bosch DVR-16L-100A | Operation Manual - Page 31
    h Input the preset number. i Delete a memorized preset position. j Start a preset tour. k Sends the Aux OFF command. (Used only for BOSCH Auto Dome camera). l Display the setup menu of the PTZ camera. (Except BOSCH PTZ camera). Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 32
    Move the camera to the preset position. o Sends the Aux ON command. (Used only for BOSCH Auto Dome camera). Table 3.5 The PTZ virtual remote control button function table Preset settings Preset icon to clear the preset positions. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 33
    the Bosch protocol, the SETUP icon is not displayed on the PTZ virtual remote control. To send the Aux On/Off commnd 1. Click the [ON] or [OFF] icon. 2. Enter the Aux command number of the BOSCH Auto Dome camera. 3. Click the icon to send the Aux commend. Bosch Security Systems User Manual F01U
  • Bosch DVR-16L-100A | Operation Manual - Page 34
    32 en | Connections and settings Digital Video Recorder 3.16 Viewing System Information To view system information: 1. Press INFO or click the INFO icon in the 3.13 System log window 2. Use b / B to see the previous or next log list. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 35
    Local) 37 HDD Formatted (HDD4) 15 Normal User Logout (Local) 38 HDD Changed (HDD1) 16 Configuration Changed 17 Configuration Imported 39 HDD Changed (HDD2) 40 HDD Changed (HDD3) 18 Factory System Fan Failure Table 3.6 System log list Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 36
    Figure 3.14 DVR setup menu a Displays the selected main menu title. b Displays the main menu icons. c Displays the submenu options. d Displays the help menu. e Displays the selected submenu title. f Displays the detail options for selected submenu. F01U | 2.0 | 2008.12 User Manual Bosch Security
  • Bosch DVR-16L-100A | Operation Manual - Page 37
    below: 1. Press ALT. The button indicator turns green. 2. Select the function button you want. All the operation explanations are based on using the remote control. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 38
    virtual keyboard menu. • Covert: You can set the camera conditions to prevent operation by other users. • Audio: You can hear from the selected input audio channel. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 39
    • Brightness: Adjust the brightness value from 00 to 100 for the selected channel. • Contrast: Adjust the contrast value from 00 to 100 for the selected channel. • Color: Adjust the color value from 00 to 100 for the selected channel. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 40
    ID from 00 to 255. Make the same settings as the PTZ camera. • Protocol: Selects the protocol supported by PTZ camera. • Baud rate: Selects the communication speed (1200, 2400,4800,9600,19200 or 38400). . - v/V: Test the tilt direction. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 41
    Figure 3.18 Continuous recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: 15, 20, 30 1, 3, 5, 7.5, 15 1, 3, 5, 7.5 1, 3, 5, 6, 12.5, 20, 25 1, 3, 5, 6, 12.5 1, 3, 5, 6 Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 42
    Recorder Figure 3.19 Instant recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: 30 1, 3, 5, 7.5, 15 1, 3, 5, 7.5 1, 3, 5, 6, 12.5, 20, 25 1, 3, 5, 6, 12.5 1, 3, 5, 6 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 43
    20, 30, 40, 50 sec or 1, 2, 3, 5, 10 min) Note: Pre-event times given are only a rough guide. Actual times are dependent upon resolution, quality, and frame rate settings, as well as the number of channels selected for pre-event recording. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 44
    20, 30, 40, 50 sec or 1, 2, 3, 5, 10 min) Note: Pre-event times given are only a rough guide. Actual times are dependent upon resolution, quality, and frame rate settings, as well as the number of channels selected for pre-event recording. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 45
    The DVR can record according to a schedule set by the user. It can also record manually channels over a 24-hour period. For each 1-hour cell block the recording method can be specified. The recording method for each block is shown in color for easy viewing. Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 46
    a day of the week. (Sun, Mon, Tue, Wed, Thu, Fri or Sat) 2. Select the desired channel to schedule recording. 3. Select the time cell block for the start time. Figure 3.24 Schedule setup menu 4. motion is detected within a designated time. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 47
    . The confirmation window is displayed. 8. Select OK and press ENTER to save the new settings. • Press ESC to exit the specific date selection menu. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 48
    In addition to the weekly schedule, up to 10 specific date/time periods can be defined. To configure the specific recording schedule select Specific Dates. 1. Select the [Exception days] option. Figure on the exception days setting menu. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 49
    fix the date of the special day and return to the special day menu screen. 8. Select the schedule time and set the recording method for each channel. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 50
    channel You can copy the schedule data of the channel to the other channel(s) within the selected day of the week. 1. Select the day of the week and press ENTER. 2. Select channel that you want to copy. 3. Press COPY then the channel selection menu appears. F01U | 2.0 | 2008.12 User Manual Bosch
  • Bosch DVR-16L-100A | Operation Manual - Page 51
    move to the left or right column then press ENTER to select the target channel(s). You can cancel the selected channel by pressing ENTER. 5. Use v/V to select [OK] then press ENTER to select [OK] then press ENTER to confirm your selection. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 52
    title of the camera. • Camera status - On: The current camera recording status is displayed. - Off: Remove the current camera recording status. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 53
    , 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec. Monitor B Figure 3.36 Monitor B setup menu Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 54
    Relay output: Select the relay output number for the selected input. • Preset: Select the preset number. When the input is activated, the camera moves to the selected preset position and the picture of the camera in that position appears on the monitor. F01U | 2.0 | 2008.12 User Manual Bosch
  • Bosch DVR-16L-100A | Operation Manual - Page 55
    area. Sensitivity can be set from level 01 to 10 or Off. • Relay output: Select the number of the output relay when motion is detected. • Area: Select the desired motion detection area on the You must check Motion Event before setting. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 56
    54 en | Connections and settings 3.22.3 Alarm acknowledgement Digital Video Recorder Figure 3.39 Alarm acknowledgement setup menu • Alarm ackn. - Manual: Use the ACK button on the remote control or stop alarm. button on the front panel to - Post-event time: The alarm is stopped after
  • Bosch DVR-16L-100A | Operation Manual - Page 57
    ] options are dimmed and these options can not be set. - Off: Enter the network settings manually. • IP address: Enter an IP address using the virtual keyboard. • Subnet mask: Enter a Center programs or web browser will be disconnected. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 58
    .no-ip.com/). In case the DVR is used in the network system with a firewall, open the TCP 8245 port so that DDNS data can get into firewall. For more detail on firewall setup, ask your network administrator and/or network service provider. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 59
    password has changed. - Off: Not used. • Video loss: - On: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. - Off: Not used. • Power on/off: - On: Sends an e-mail when power is on or off. - Off: Not used
  • Bosch DVR-16L-100A | Operation Manual - Page 60
    agent). In certain cases all e-mail should be forwarded to a specific SMTP server. Specify the server host name or IP address in such a case. For more detail on SMTP setup, ask your network administrator and/or mail service provider. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 61
    this port number for added flexibility or security. If desired, change the port number (1025 ~ 65535). You can set up to 9 IP address/port numbers. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 62
    daylight saving function. • Daylight saving start: Select the Daylight saving start time. • Daylight saving end: Select the Daylight saving end time. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 63
    and [NTP test] options are deactivated. • Time server: For most cases select public. The DVR will obtain the average time among 5 public servers (time.nist.gov, time-a.nist.gov, time-b. NTP test: Select [NTP test] to test the NTP server. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 64
    on this unit. If you want to make a loud sound, connect an external alarming device to the output connecter (ext. siren). F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 65
    24.4 User You can register a new user with various access rights to the DVR or Control Center. Figure 3.48 User setup menu • No.: Displays the user password please contact an authorized service center or the dealer you purchased the system. Bosch Security Systems User Manual F01U | 2.0 | 2008
  • Bosch DVR-16L-100A | Operation Manual - Page 66
    perform the update: • USB: Select USB, and then insert the USB drive into the DVR. All USB devices must be disconnected before you can use the USB drive. • Network: Select Network, and then do the dialog box. 5. Click OK to restart the DVR. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 67
    ). Notes: • Configuration data import is available when the configuration data of a DVR is the same kind as this unit's data. • If you use a USB memory stick for configuration export, you must disconnect the other external USB devices. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 68
    of HDD is deleted and the partition is reset. The partitions will be formatted automatically and the system will be restarted. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 69
    backup schedule. - Off: All options are disabled. - Instant: The backup data is saved manually. - Weekly or daily: The backup data will be automatically saved according to the setting. • start backup. • Erase media: To erase the media. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 70
    -ROM drive. • Backup to external USB HDD is supported with maximum 250 GB. • Use the recommended external USB devices for preventing malfunction (See "8.2.1 Supported USB memory list"). • The CD-R, DVD-R or will be displayed as shown below. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 71
    When you set the time for data that does not exist. - When the selected USB device is disconnected. • The estimated size of backup data is only the approximate size. Be sure to allocate sufficient the schedule backup may not be activated. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 72
    DVR unit. • DVR ID: Select the DVR ID for this unit (01~16). If you use multi systems set the DVR ID for each DVR unit. • Auto user logout: Logout is automatical at fixed intervals. You can set auto logout time to 5 min, 10 min, 30 min, 60 min or Off. F01U | 2.0 | 2008.12 User Manual Bosch
  • Bosch DVR-16L-100A | Operation Manual - Page 73
    the front panel to start record. The red dot is blinking on the selected channel screen of the main monitor. Figure 4.1 Rec buttons 3. Press the REC button . Figure 4.2 Selected channel screen of the main monitor, showing the red dot. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 74
    record the Input and Motion recording under the following conditions. - A HDD is not formatted. - The channel has no video input for display. - Overwrite is set to "Off" or "Normal Partition", and event > Motion record > Continuous record. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 75
    73 5.1 Playback It is possible to play a recorded image without stopping recording. 1. Select a channel you want to playback. 2. Press bB to play a recorded image of the previous 2 minutes . 2. Press ESC to move to the Title menu tab. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 76
    the USB device. It may cause a malfunction. Date/time search Use to search recorded pictures by specifying date, hour and minute. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 77
    result is displayed in the time table of the search menu. 6. Use the channel buttons on the front panel to select the channel(s) you want to play back. 7. Press bB or Click the [Play (B)] icon menu. 9. Press SEARCH or ESC to exit the menu. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 78
    the previous or next column or changes the setting at the current position. - ENTER: Selects the column or confirms the setting. 3. Select the channel for event search using ENTER. 4. Use v/V/b/B to select the [Event type] then press ENTER. 5. Select the [Search] icon then press ENTER. The event list
  • Bosch DVR-16L-100A | Operation Manual - Page 79
    . Figure 5.8 Smart search menu 1. Select the [Smart search] menu. 2. Set the channel number, start time, end time and sensitivity options. - b/B/v/V: Moves to the options or then press ENTER. The motion detect list menu is displayed. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 80
    monitor. 3. Press STOP (x) to stop playback and return to the bookmark list menu. 4. Press ESC to exit the bookmark search menu. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 81
    a bookmark search. • You can register a bookmark only in the single channel playback. • You can not register a bookmark during instant playback 5.3 Functions may be skipped. • Multi channel play works only in the date/time search function. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 82
    the channel number(s). 4. Set the start date/time and end date/time to copy. 5. Press COPY or Click icon to start exporting. The exported data will be authorized by the unit before saving and it can only be played back with the Archive player. F01U | 2.0 | 2008.12 User Manual Bosch Security
  • Bosch DVR-16L-100A | Operation Manual - Page 83
    COPY button on the front panel for export function. - DVR-16K/DVR-16L: Press ALT and then COPY button. - DVR-8K/DVR-8L: Press COPY button only. • You can export channel number(s) - User ID that is logged on the system when an export was made. Bosch Security Systems User Manual F01U | 2.0 | 2008.
  • Bosch DVR-16L-100A | Operation Manual - Page 84
    82 en | Search and playback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 85
    Video Recorder 6 Control Center Control Center | en 83 6.1 Control Center is the network program of the DVR-8K/DVR-8L and DVR-16K/DVR-16L. This manual is written based on DVR-16L (16 channels). The description pictures may differ from your OS (Operating System) type. The pictures used in this
  • Bosch DVR-16L-100A | Operation Manual - Page 86
    , IP address and port. - Site Name: Enter the description of the site. - IP Address: Enter the IP Address or URL of the DVR. - Port: Enter the Port number of the DVR. If it isn't entered, the port number is set by default. 5. Select [OK]. Figure 6.3 Connection list window 6. Select [OK] to con
  • Bosch DVR-16L-100A | Operation Manual - Page 87
    Figure 6.4 Remote log on window 4. Select [OK] and the [Divar MR Control Center] main window is activated. • If someone is logged on to the DVR using the Admin ID, you can not log on using the Admin Normal Normal Normal Normal Normal Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 88
    DVR Control Center Program 1. Program Menu • File - Exit: Exit the program. • View - OSD > Channel Number: Displays or removes the channel number in the channel window. > Site Name: Displays or removes the site name in the channel Search Mode F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 89
    the channels in sequence. You cannot use sequence mode with the 16 multiscreen view. 6. Information Display Window Displays current date and time, user information, and the remaining HDD status of the selected site name. Figure 6.6 Information Display Window Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 90
    the left mouse button or click the plus mark. Figure 6.7 Divar MR Control Center Window 4. Select the channel number you want to view. 5. Click the channel number and drag and drop to live window position. If you live mode only in playback. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 91
    Normal User ID. Using the Pan/Tilt/Zoom function You can control the PTZ cameras via the network. Figure 6.10 The Pan/Tilt/Zoom window Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 92
    Video Recorder 1. Select the PTZ camera channel window in the camera view mode. 2. remote control button table Notes: • If someone is controlling a PTZ camera using the DVR, you cannot use the PTZ function and vice versa. • You can not use the | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 93
    the menu. 1. Click the [SETUP] icon. SETUP MENU appears in the windows. 2. Use the arrow and icons to set the options. Note: Refer to the manuals of the PTZ camera for more details. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 94
    blue text color.) Figure 6.12 The day select window 3. Click the search icon. The system log is displayed in the list. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 95
    window 1. Select the date/time search tab. 2. Click the date icon and select the day (the selectable days are displayed in blue color). 3. Select the channel window you want to view. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 96
    channel windows. Displays selected camera number. Figure 6.15 Camera channel select window 4. Use the timeline and time input column to search recorded data. Figure 6.16 channel for event search. 4. Select the event type. 5. Click the search icon. F01U | 2.0 | 2008.12 User Manual Bosch Security
  • Bosch DVR-16L-100A | Operation Manual - Page 97
    . Using the Smart search function Picture recorded via motion detection can be searched by specifying the motion detection conditions. Figure 6.20 The Smart search window Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 98
    icon and select the day. (The selectable days are displayed in blue color.) 3. Select the camera channel. 4. Select the start time using the timeline. Digital Video Recorder Figure 6.21 Selected start time smart search data is displayed. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 99
    channel from the list. 9. You can play the searched data using the playback control buttons. Remote Setup mode You can set the DVR of a selected site name in the remote setup tab via the network. Camera / Display setup Figure 6.25 The Camera/Display setup window Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 100
    channel. 4. Set the PTZ control options. • COM port: Select the connected data port of the RS-422/485 terminal on the rear panel. • Control ID: Select the PTZ camera ID from 0 to 255. Make the same settings as the PTZ camera. • Protocol: Select the protocol supported Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 101
    6.28 The Instant recording setting window 2. Set each option using the mouse (see "3.19.5 Instant recording"). 3. Click the [OK] button to confirm the settings. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 102
    setting window 2. Set each option using the mouse (see "3.19.7 Motion recording"). 3. Click the [OK] button to confirm the settings. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 103
    the input is activated or motion has been detected, change the continuous recording mode to motion event recording mode and recording starts automatically. 3. Select the channel to set the schedule. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 104
    channel and drag & drop across the channels to select the time period block for multi-channel up the desired recording option. 4. Select the channel to set the schedule. 5. Click the start of a channel and drag & drop across the channels to select the time period block for multi channel setting at
  • Bosch DVR-16L-100A | Operation Manual - Page 105
    • Linked camera: Select the connected camera channel with the ALARM I/O port. • Relay out: Select the alarm output number of the RELAY-OUT terminal for the output alarm signal. Alarm ackn.: Set the "Manual" or "Post-event time" option to off. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 106
    host name or IP address in such cases. For more detail on SMTP setup, ask your network administrator and/or mail service provider. Notification Set the notification options. • Alarm on: Sends an e-mail when an input has been activated. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 107
    video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. • Motion detect: Sends an DDNS function is serviced using a TCP 8245 port by "No-IP" (http:// www.no-ip.com/). In case the DVR is used in Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 108
    This option setting is not available in the Control Center program. • Server: Select your time server. The DVR will obtain the average time among 5 public servers (time.nist.gov, time-a.nist.gov, time-b.nist.gov, of the update server. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 109
    the user ID you want to delete 2. Click the "Delete" button. 6.8 Remote Export Settings You can copy the recorded images and audio data from the DVR unit to the PC. This function is permitted for Administrator and Advanced user. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 110
    exported data. The initial save folder is "C:\Program Files\Bosch Security Systems\Divar MR\Exports". If you want to change the exported data save . Notes: • The exported data file name is made as the [Channel number_Entered name.exp (or "avi")] type. • If you do not Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 111
    the [Check Message Box] option to display the [Divar MR Alarm Notifier-Received Messages] window. 5. You can check all the subjects of received messages. 6. Click the button to close the [Divar MR Alarm Notifier-Received Messages] window. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 112
    the search window. f Refreshes the received message on the list. g Detailed view of the received message. h Deletes the selected message from the list. i Closes the [Divar MR Alarm Notifier-Received Messages] window. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 113
    by selected type of event for the message. • Date search: Search by selected date. 3. Click the Search button. The search message is displayed on the [Divar MR Alarm Notifier-Received Messages] window. Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 114
    Figure 7.7 The Archive Player window • Program Menu. - File(F) > Open: Open the archived file. > Print: Print image in window of Archive Player. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 115
    Camera Number: Displays the camera channel number of recorded data. 7.3.2 Playing data 1. Double-Click the [Divar MR Archive Player] icon on the is "Channel name_date_time.exp". 4. Click the [Open] button. The selected data is played back automatically. Bosch Security Systems User Manual F01U
  • Bosch DVR-16L-100A | Operation Manual - Page 116
    114 en | Additional programs Digital Video Recorder Figure 7.9 The Archive Player window 5. Click the button to stop playback. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 117
    you connect the DVR for the first time, the Security Warning window is displayed. You must click [Install] on the Security Warning window to install the program for using the Web Viewer. If you click [Don't Install], the Web Viewer program is not available. Bosch Security Systems User Manual F01U
  • Bosch DVR-16L-100A | Operation Manual - Page 118
    If you want to set to full screen, double click the selected channel. To return to the previous screen, double click again. • Right mouse button: If you want to exit full screen mode, right click the mouse to return to the normal screen. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 119
    virtual remote control window • Use virtual remote control buttons to control the PTZ camera. For more details, refer to "6.5.3 Using the Pan/Tilt/Zoom function". Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 120
    118 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 121
    8.1 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptoms the video cable connection from the camera to the DVR system. Turn off the DVR system and turn it on again. The camera Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 122
    has a problem, check that video format can support either PAL or camera has a problem. Ensure the camera DVR is cut, crosswired, or shorted. Check if there is a high voltage wire around the video cable connection between camera and DVR the DVR system that the selected channel to control the PTZ
  • Bosch DVR-16L-100A | Operation Manual - Page 123
    of SMTP mail services do not support e-mails from DVR does not operate normally. You can reboot the DVR as follows: • Turn off the DVR and turn it on again after a few seconds. When the recorder does not work normally after rebooting, contact the service center. Bosch Security Systems User Manual
  • Bosch DVR-16L-100A | Operation Manual - Page 124
    DVD+RW Yes Yes No Yes Note: 8cm 1.4G mini DVD is not supported. 8.2.3 Supported function list for device Device CD/DVD USB memory USB HDD Instant backup Yes import/ export, you must disconnect the other external USB devices. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 125
    Digital Video Recorder 8.2.4 Supported PTZ camera list Protocol Name Maker Pan/ Tilt Zoom Focus Iris BOSCH BOSCH YES YES YES YES PELCO D PELCO YES YES YES YES PELCO P YES YES YES YES NO YES YES YES YES YES YES Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 126
    :00 -02:30 +01:00 +02:00 +03:00 +03:00 +03:00 +04:00 +04:00 +04:30 +12:00 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 127
    Covert Audio Channel Brightness Contrast DVR-16L DVR-8K/ DVR-8L Factory Default Camera 1 ~ Camera 16 Camera 1 ~ Camera 8 Yes Off Yes 01 ~ 08, None 01 ~ 04, None Yes 01:Name 50 Yes 50 Yes 50 Yes 01:Name None Yes 00 Yes Bosch Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 128
    time Event popup In Input type Camera Relay output Preset Camera Sensitivity Relay output Area Alarm ackn. DHCP IP address address Port no. Default Setting DVR-16K/ DVR-16L DVR-8K/ DVR-8L English On On 2 sec 2 sec Off N.O. 01~16 01~08 None None 01:Name Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 129
    start Time range date Time range start Time range end IR remote controller DVR ID Auto user logout Default Setting DVR-16K/ DVR-16L DVR-8K/ DVR-8L 2007.01.01 0:00 YYYY/MM/DD 12 hr GMT Off Jan Yes 0 Yes 01 Yes 01 Yes Off Yes Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 130
    12.5 7.5/6 5/5 3/3 1/1 Recording Time (Hr) Video (NTSC/PAL) Video+Audio (NTSC/PAL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-16K/ DVR-8L DVR-16L 550/440 275/220 501/401 251/201 571/457 285/228 518/415 259/207 833/666 358/286 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 131
    7.5/7.5 5/5 3/3 1/1 Recording Time (Hr) Video (NTSC/PAL) Video+Audio (NTSC/PAL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-16K/ DVR-8L DVR-16L 642/514 321/257 576/461 288/231 906/725 453/363 781/625 399 249/199 458/367 229/183 Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 132
    /12.5 7.5/6 5/5 3/3 1/1 Recording Time (Hr) Video (NTSC/PAL) Video+Audio (NTSC/PAL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 176/141 88/70 160/128 80/64 183/146 91/73 166/133 83/66 267/213 133 180/144 F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 133
    /15 7.5/7.5 5/5 3/3 1/1 Recording Time (Hr) Video (NTSC/PAL) Video+Audio (NTSC/PAL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 77/62 39/31 74/59 37/30 89/71 44/36 85/68 42/34 123/99 119/95 210/168 105/84 Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 134
    3/3 1/1 7.5/7.5 5/5 3/3 1/1 Recording Time (Hr) Video (NTSC/PAL) Video+Audio (NTSC/PAL) DVR-8K/ DVR-8L DVR-16K/ DVR-8K/ DVR-16L DVR-8L DVR-16K/ DVR-16L 137/110 68/55 127/102 64/51 177/141 88/71 161 your surveillance environment. F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 135
    NTSC PAL Playback Function Search Mode Frame Rate (/sec) NTSC PAL Multiscreen Mode DVR-8K/DVR-8L DVR-16K/DVR-16L 8 16 Composite video 0.5-2Vpp, 75 ohm, automatic termination. 8 16 1 1 1.0Vpp±0.1V, 75 Ω 1 1 Analog RGB 800x600 1 1 1.0Vpp±0.1V, 75 Ω 4 8 Line In, 30KΩ 1 1 Line
  • Bosch DVR-16L-100A | Operation Manual - Page 136
    Digital Video Recorder Model Power Power consumption Dimension (WxDxH) Net Weight (with 4x HDD) Operation Temp. / Humidity Impedance Bi-phase Overvoltage protection Max. cable length Keyboard Output DVD writer DVR-8K/DVR-8L DVR-16K/DVR-16L 100~240VAC, 50/60Hz Max. 80 W (with 1x HDD) / Max
  • Bosch DVR-16L-100A | Operation Manual - Page 137
    Digital Video Recorder Reference | en 135 Bosch Security Systems User Manual F01U | 2.0 | 2008.12
  • Bosch DVR-16L-100A | Operation Manual - Page 138
    136 en | Reference Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Systems
  • Bosch DVR-16L-100A | Operation Manual - Page 139
  • Bosch DVR-16L-100A | Operation Manual - Page 140
    Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2008 F01U | 2.0 | 2008.12 P/N: MFL????????
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Divar MR Digital Video Recorder
Type numbers
DVR-8K, DVR-16K, DVR-8L, DVR-16L
en
Operation Manual_en