Bosch HBL8650UC Installation Instructions - Page 15
Testing Operation - manual
UPC - 825225853121
View all Bosch HBL8650UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Oven 1. Lift or slide unit into cabinet cutout. Do not lift appliance by door handle. 2. Push straight in until oven trim is flush with cabinet wall, being careful not to crimp flexible conduit between oven and cabinet back wall. The oven should be straight and level, not crooked. 3. Install supplied screws through tap holes in trim. (2 screws for single ovens, 4 screws for double/combo ovens) To replace the oven door: 1. Holding the door firmly in both hands, place hinges in hinge slots. 2. Open door all the way to expose hinges and slots. 3. Push lever down and away from you until flush with the bracket. 4. Close and open door slowly to be sure it is correctly and securely in place. Door must be straight, not crooked. Testing Operation 1. Turn on power at the breaker. 2. Check power at junction box using a volt meter. For 240 V installation, the reading between the red and black wires (line to line) should be 220 to 240 volts. For 208 V installation, the reading between the red and black wires (line to line) should be 190 to 208 volts. 3. Test the oven mode. Select the BAKE mode. See the Use and Care Manual for detailed operation instructions. 4. Verify that the oven light comes on and the oven begins to preheat. 5. Test the door lock. Set the SELF CLEAN mode. Confirm that the door locks when the lock icon appears in the display. 6. If installing a double oven, test the second oven as well. 7. If any of the tests do not result as explained above, contact Bosch service for assistance. Otherwise, the installation is complete at this time. English 13